Trapped in Amber....

[the poacher]

Happy to answer any questions if you have some! Forum users can also use code BRONCO10 to save $$ when they shop with us. The integrated windshield light bar is a great upgrade!

There have been some terrible reviews in regards to this windshield light bar system. Have these problems been corrected and are you now standing strongly behind this product when your customers experience these issues?

Sponsored

 

[Ridge]

Looks great! Are they all on aux switches? I used the the Putco wire that goes to the fuse box to run my amber backlights so they turn on when I hit start.

The Baja Designs a-pillars lights, and fogs are the only ones tied to the Aux switches. Four switches: 1) A-pillar bright white (not street legal and had to be on the first switch because of necessary amps) 2) A-pillar amber back light 3) amber squadron fogs 4) bright white fogs (assuming not street legal because I get a lot flashes when I turn them on). The Putco emblem comes on at start as do the Form headlight DRLs, mirror signal DRLs and F150 grille lights.

Not sure if you read the threads about to the low cost dual exhausts that Ford removed, but after reading that I decided to upgrade the exhaust and the got the Borla S-Type. Sounds perfect. Meaning you can tell its there at cold start and when you lean on the gas, but otherwise quieter than stock when cruising.

 

[Robs94Bronco]

Not sure if you read the threads about to the low cost dual exhausts that Ford removed, but after reading that I decided to upgrade the exhaust and the got the Borla S-Type. Sounds perfect. Meaning you can tell its there at cold start and when you lean on the gas, but otherwise quieter than stock when cruising.

Think I'm going muffler delete.

 

[OracleLights]

There have been some terrible reviews in regards to this windshield light bar system. Have these problems been corrected and are you now standing strongly behind this product when your customers experience these issues?

As with any high-volume product, we’ve seen feedback over time and we take it seriously. When improvements are identified, whether related to components, sealing, or installation guidance, we evaluate and incorporate refinements into production where appropriate.

We absolutely stand behind our products and our team is always available to troubleshoot or support customers experiencing issues. If anyone has a specific concern, we encourage them to reach out directly so we can look at their situation individually. We’re committed to continuous improvement and to supporting our customers the right way!

Sponsored