I checked out some new tube doors and recorded another installation video. Love how they turned out, and got a decent photo too! Will release the video soon!
Sponsored
Sponsored
What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠
Here’s a few pics I took after my ride. Bike fits inside with the tailgate closed and the front passenger seat moved up about halfway. Fork is secured with a thru-axel mount.
This is a medium Santa Cruz Tallboy, which has a long wheelbase for a short-travel bike. It has a dropper post and at the lowest position the saddle is just under the rollbar. If you don’t have a dropper post, removing the saddle would be necessary but is quick.
- First Name
- Joseph
- Joined
- Oct 13, 2020
- Threads
- 23
- Messages
- 824
- Reaction score
- 1,138
- Location
- Chapel Hill, NC
- Vehicle(s)
- Grand Cherokee Trailhawk
- Your Bronco Model
- Badlands
Got my graphics from @Underground Graphics installed. Will take better pictures later, but love how it turned out.
- First Name
- Sean
- Joined
- Nov 21, 2020
- Threads
- 4
- Messages
- 631
- Reaction score
- 1,099
- Location
- Jenks, Oklahoma
- Vehicle(s)
- ‘19 Raptor, ‘21 Macan S, ‘22 Big Bend, '21 FE
- Your Bronco Model
- First Edition
Slide out tailgate installed Tuesday myself.Put in the tailgate table and built a bike fork holder. This thing is so fun
- First Name
- Paul
- Joined
- Oct 11, 2021
- Threads
- 16
- Messages
- 153
- Reaction score
- 84
- Location
- Hudson Valley, NY
- Vehicle(s)
- 2021 bronco
- Your Bronco Model
- Outer Banks
How easy was the install and do they provide a lot more light? I am on the fence about getting them
Sponsored
- First Name
- Paul
- Joined
- Oct 11, 2021
- Threads
- 16
- Messages
- 153
- Reaction score
- 84
- Location
- Hudson Valley, NY
- Vehicle(s)
- 2021 bronco
- Your Bronco Model
- Outer Banks
Got my graphics from @Underground Graphics installed. Will take better pictures later, but love how it turned out.
I really like those latch covers. I have them saved on my Amazon list. I was going to go black but the blue looks great. Do they match the blue stitching (if you have it)Installed these blue aluminum covers over all 3 latches today. And placed the cheap oem big bend decals on tailgate and engine cover.
I don't have the blue stitching. I went with blue as its the accent color I've been going with to contrast the body color of cactus gray.
- First Name
- Matthew
- Joined
- Feb 19, 2022
- Threads
- 2
- Messages
- 33
- Reaction score
- 53
- Location
- Santa Cruz
- Vehicle(s)
- 2023
- Your Bronco Model
- Outer Banks
Very nice! What brand are the lower door panel sill covers?I checked out some new tube doors and recorded another installation video. Love how they turned out, and got a decent photo too! Will release the video soon!
Sponsored
- Joined
- Dec 4, 2021
- Threads
- 3
- Messages
- 91
- Reaction score
- 293
- Location
- Central Minnesota
- Vehicle(s)
- 1972 Bronco
- Your Bronco Model
- Badlands
If you watch the IAG video prior to the install, then do each step and go back and watch the video on anything you are unsure of, it is easy. Like everyone says, tapping into the gray and purple wire is the worst part. I used a small flat tip screw driver to separate the wires next to the connector to ease the installation of the scotch lock type connector. The extra light is well worth the effort. I will wire in to the upfitter switch, so I can turn on the new lights when the doors are closed. Pretty easy, if you follow the ford instructions. Good luck, you’ll be happy you took the effort.
- First Name
- Dave
- Joined
- Aug 25, 2020
- Threads
- 24
- Messages
- 3,125
- Reaction score
- 11,869
- Location
- Hanging Rock, North Carolina
- Vehicle(s)
- 19 Z71, 06 VTX1300, 94 Cobra, 21 BL Bronco 4dr.
- Your Bronco Model
- Badlands
Homemade attic tray, additional small flat bar underneath for clipping radios, can be used with gear straps to hang straps, cords, air hose if needed.
Lined it with kayak deck mat to prevent slippage, waterproofing, rattles.
Used the Pura Vida traction board uprights.
It’s a shame it negates the top from being able to go fully down, but best I can measure it seems to do so would limit you to about a 8.5-9” wide tray.
I tried to remedy some of that headache with some RivNuts and quick-turn knobs to remove the shelf. No such magic for the uprights, as there is no room for them between the mounting holes and the vertical part of the brackets.
So it would take maybe 3 minutes with an Allen wrench to remove those as well.
Lined it with kayak deck mat to prevent slippage, waterproofing, rattles.
Used the Pura Vida traction board uprights.
It’s a shame it negates the top from being able to go fully down, but best I can measure it seems to do so would limit you to about a 8.5-9” wide tray.
I tried to remedy some of that headache with some RivNuts and quick-turn knobs to remove the shelf. No such magic for the uprights, as there is no room for them between the mounting holes and the vertical part of the brackets.
So it would take maybe 3 minutes with an Allen wrench to remove those as well.
- First Name
- Steve
- Joined
- Oct 26, 2020
- Threads
- 3
- Messages
- 124
- Reaction score
- 100
- Location
- California
- Vehicle(s)
- Mini Countryman
- Your Bronco Model
- Big Bend
Link to this product?
The link is in the description of the video, I put links in all of my video descriptions to the products.
But here is the link for you: https://amzn.to/3SxRJDu
They are currently out of stock but them plan to have them back in stock in 1-2 weeks.
Sponsored
