Will SAS wheels fit

[Rickap7]

a 25 Big Bend no lift. Will SAS wheel 315/70r17 fit without the truck being lifted (sure ill have to remove crash bars) Also will they mess up speedometer reading? No off-road driving.

Sponsored

 

[LI Bronco]

A lot of previous posts on this. Yes you have to remove crash bars. It will fit but if you do a lot of fourwheelin, it could rub. Pavement and light fourwheelin should be fine.

 

[Dlars99]

You are going to need to recalibrate the speedo. Like @LI Bronco said remove the crash bars and don’t get crazy in the woods and it won’t rub.

 

[Oldhippie]

Yes ya can bolt them on and remove the crash bars to avoid them rubbing while turning but the tires will hit the fenders at full compression…I recommend at least a 3/4” body lift…they are also heavier (more unsprung weigh) so they “stress” your stock coilovers more which will adversely effect handling/control…better coilovers are always a good idea…and yes your speedo will be off too….pay to play…party on!

 

[MNBigfoot]

BB to SAS:

 

[T800]

You might want to consider a set of the SAS CO take offs. I've seen them pretty cheap on FB Marketplace.

Sponsored