Wolfbox G900 Tripro Front Camera Mount

[Brad903]

This would only work if your Bronco isn’t equipped with ACC.

Sponsored

 

[Bugkillah]

What does it do? Tell us more…

 

[Brad903]

I found a mount for the tripro camera and mounted it to the front of the ACC cover plate.(Will only work for Broncos that don’t actually have ACC)The mount comes in 4 different angles sold by Crossroad 3D , Keeps the camera stable and a better all around look.

 

[Southside_Ray]

I found a mount for the tripro camera and mounted it to the front of the ACC cover plate.(Will only work for Broncos that don’t actually have ACC)The mount comes in 4 different angles sold by Crossroad 3D , Keeps the camera stable and a better all around look.

Which angle did you choose and what does it look like on the screen?

 

[Brad903]

Which angle did you choose and what does it look like on the screen?

I went with the 11 degree angle, from the screen I can adjust and see straight out or I can adjust it to see the parking line in front of bumper.

 

[Brad903]

Which angle did you choose and what does it look like on the screen?

Here is two photos: first angled all the way up. The other is all the way down, the bumper is like 2 feet away from the can in the picture
[QUOTE="Southside_Ray, post: 2773827,

 

[HeHateMe]

That's a big ass mount! I had seen it and had it on my list, but now rethinking it... It was like $30 or so shipped?

 

[Southside_Ray]

This actually helps a lot, thanks for the information and photos!

 

[NC_Oak]

I have my front mounted on a magnetic base with a 1/4-20 (maybe 10-24 cant rememebr) stud. Very strong magnet, and it is mounted on my aftermarket steel bumper. I use the swivel feather to adjust the angle on whenever. I also have an extension pole of sorts that I drop on the bumper and swing the magnetic mount over to that. Then I have a backward facing view (at the front tires) so I can guide the fronts real time with real view.

Sponsored