Bronco looks great!flowmaster outlaw axle back dual exhaust black
Any drone on the highway say at 70-80mph?
Easy to install? Any tips/suggestions?
I'm close to pulling the trigger on this.
Sponsored
Bronco looks great!flowmaster outlaw axle back dual exhaust black
Looks bada$$Picked up black diamond and had 1 inch level lift put on with 285/75/17 KO2's. Love it!
If you ordered the Modular Bumper, you have no fog lights. If you did Not order the Modular Bumper, then you have the steel Capable Bumper with the fog lights, which is standard on the 2022 Black Diamond and Badlands.Silly question but I see some BD front bumpers have the fog lights built into them and some have the spots in the bumpers where you can install aftermarket ones. My order summary says steel front bumper but the built email I got from ford shows a picture of the bumper with the single fog lights on each side. How do I know which bumper I got?
Thank you. I thought it was just one bumper that came with it. Just figured out I saved myself $350 on fog lightsIf you ordered the Modular Bumper, you have no fog lights. If you did Not order the Modular Bumper, then you have the steel Capable Bumper with the fog lights, which is standard on the 2022 Black Diamond and Badlands.
Closer to $900, since the Mod Bumper is like $545 for either the BD or BL.Thank you. I thought it was just one bumper that came with it. Just figured out I saved myself $350 on fog lights
Right, I just meant with the oracle fog lights I have preordered that I will be canceling Monday. I wasnāt accounting for the extra charge from fordCloser to $900, since the Mod Bumper is like $545 for either the BD or BL.
Looks great! Did you lift/level and keep or remove crash bars?Looks great. Imma paint those damn wheel weights...just you see.
Toyo AT3 - 285/75R17
Thanks!Looks great! Did you lift/level and keep or remove crash bars?
Itās the winch plate from JCR off-road, and the license plate is literally hanging on by one bronco bolts on the MOD bumper. I just I put a piece of foam tape on the backside of the plate so it doesnāt rub! Itās only temporary I bought a winch fairlead license plate bracket however it doesnāt accommodate the thickness of my factor 55 FlightLink. So Iāll have to figure something out
There was a member here a long time ago that bolted a maglight mount to the back of his front plate. Then he simply clicked the plate onto the fairlead. He removed it whenever he needed the winch. He did say to be careful not to forget it when you are done.Itās the winch plate from JCR off-road, and the license plate is literally hanging on by one bronco bolts on the MOD bumper. I just I put a piece of foam tape on the backside of the plate so it doesnāt rub! Itās only temporary I bought a winch fairlead license plate bracket however it doesnāt accommodate the thickness of my factor 55 FlightLink. So Iāll have to figure something out
Tires are louder than the exhaust, only gets loud if you punch it. Sounds like a raptor imo.Bronco looks great!
Any drone on the highway say at 70-80mph?
Easy to install? Any tips/suggestions?
I'm close to pulling the trigger on this.
ThanksTires are louder than the exhaust, only gets loud if you punch it. Sounds like a raptor imo.
no drone at all. Buy it from rudy's performance parts, he is my boy and the cheapest around. In the sponsors tab too