What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Jack D]

Hoping to drive Outer Banks later this summer, and not bring the beach home in my crash bars. Plugged the crash bar ends (Driver side shown). Thanks, Budget Bronco, for the video tip.

Sponsored

 

[AZMikeL]

Definitely took some muscle to get them right. I did have to grind one hole out a little with the dremel to get the last bolt to fit on the rear passenger bracket.

Overall I’m happy with the look. Dunno how much help they’ll be for my short wife. Planning on crawling back under in a week or two to make sure everything is still tight.

My wife is vertically challenged as well. Get yourself some grab handles (I got the Bartact ones) to go with the zroadz steps and she should be good to go.

Mine immediately went back to complaining about my driving rather than getting in and out of the Bronco after I got both bolted on.

 

[JonDW29]

Installed the Xipex console vault. Pretty much the same as the OEM, though the oem might have a bottom plate? Not positive. But this one was nearly 1/4 the price of OEM.
They're not the strongest things, since they're held in with pressure and 4 self tapping screws in to plastic, but better than nothing, and nearly everything is just a deterrent, not an actual stop.

Pretty sure that's how the console vault on my F-150 installed as well. Doubt they have a bottom plate as that's where the key cutout is in case your fob battery dies.

 

[greatlakes]

Took a subtle jab at our Jeep friends.

 

[Cliff White]

The blind spot in the blind sport in between the sideview mirror and the warning light that comes on to tell you traffic is there can be fixed by adding a convex mirror to the B pillar. It helps a lot! As you can see in the photo the pick up is now visible in the side view mirror, but will disappear before the warning light come on. Easy fix.
Also, installed the Pedal Commander today. It is amazing how it helps the throttle response.

 

[RUZ]

Installed Suma mirrors today.

 

[XirallicBolts]

Got our $1300 in FordBucks™, went to the dealer and spent it all. Black platinum sill plates, multicolor ambient lighting modules, cargo liner / net, sunvisor, grille lettering, hitch kit with wiring, tailgate table, and a hoodie we saw hanging in the parts department.

Having finished the electric hardtop hoist for the garage, realized I cringe everytime the socket wrench hits the window so I designed and printed a rubber cap for the wrench to soften the impacts

 

[Tor148]

Installed Suma mirrors today.

How do you like the Suma?
Does it cover the bliss indicator?
Do you like the blue tint?

 

[mikec426]

Installed Suma mirrors today.

Awesome. Tips for the install? Mine are on the way.

 

[RUZ]

How do you like the Suma?
Does it cover the bliss indicator?
Do you like the blue tint?

I haven't had a chance to drive and test them out yet. The blue is different, but I dont think it will take long to adjust to them. They have the defrost and Bliss built in as an option.

 

[RUZ]

Awesome. Tips for the install? Mine are on the way.

There is info / pics on the Suma thread that describe it well. Take it slow. Put a screwdriver in the slot on the corner and twist. I had to reroute the defrost wires to get some slack.

 

[GiveItaTri]

I visited the site of a Pony Express station along the Oregon Trail.

 

[DaveInSA]

... multicolor ambient lighting modules ...

Excuse me? Why have I not seen this before? Got a part number?

 

[XirallicBolts]

Excuse me? Why have I not seen this before? Got a part number?

https://www.bronco6g.com/forum/threads/color-changing-ambient-lighting-using-ford-oem-parts.42484/

I'm only going to replace the two front footwell lights, so FL3Z-14A318-L and FL3Z-14A318-N should be all I need for parts. Not ambitious enough to cut into the cupholder

 

[CUPRA]

I embraced the 'Outer Banks Blue' additional trim color and installed blue paracord handles in our Bronco. Ridiculously easy install!

Sponsored