- Thread starter
- #16
look closely at these pics. You can see the same part that’s on your light mounted to bracket.
Sponsored
Gotcha. Thanks. I thought it swapped the mount with the bracket. I’ll pass on the free set, but really appreciate the offer!It’s the same. You have the hinge, and that bottom L shaped piece with the large bolt. That will bolt to the bracket, and then you remove both of the accessory screws and mount bracket there and replace screws. It raises the lights and puts them to the side so not in the way of antenna etc.
Kinda at an incline here so bad angle but:Yes! Zoomed out pic please! Looks great.
Looks great. Thanks for posting. Nice piece of property too!Kinda at an incline here so bad angle but:
I just picked up these lights. What is that bracket mount? Light kit didn’t have one. Thank you!Incredibly simple using Bronco upfitter switches!
You literally cut off half of the wiring harness, and you don’t use the relay. Simply tie the 2 red positives together to the preferred aux switch wire by firewall; and attached ground to the point right next to it. So fast and easy! No fighting getting things through firewall is amazing.
Had some wire cover laying around and covered the wires behind the lights with it and it turned out great!
Part of harness and parts I didn’t use above ^
Why remove the relay? I just got a set of lights that have their own switch with a relay and I’m trying to figure out how to only replace the switches.You literally cut off half of the wiring harness, and you don’t use the relay. Simply tie the 2 red positives together to the preferred aux switch wire by firewall; and attached ground to the point right next to it. So fast and easy! No fighting getting things through firewall is amazing.
Had some wire cover laying around and covered the wires behind the lights with it and it turned out great!
Part of harness and parts I didn’t use above ^
Ditch mounts by KC. I actually still have a brand new set in the box I’m not using.I just picked up these lights. What is that bracket mount? Light kit didn’t have one. Thank you!
These lights didn’t require relay when in use with upfitter.Why remove the relay? I just got a set of lights that have their own switch with a relay and I’m trying to figure out how to only replace the switches.
Thank you. Actually, after I asked you on here, I found them on Amazon priced at $60. I went to the hardware store and bought a $20 piece of steel and some paint and made my own pair.Ditch mounts by KC. I actually still have a brand new set in the box I’m not using.
Yeah I was gonna say 30 shipped they yours to get them out of my garage lol. Don’t even have a bronco anymoreThank you. Actually, after I asked you on here, I found them on Amazon priced at $60. I went to the hardware store and bought a $20 piece of steel and some paint and made my own pair.
Ha! I appreciate the gesture man. The other night when I came home with the lights, my buddies were just like “why don’t we just make some brackets?” For what these things sell for at market value I gotta just start a bracket business lol.Yeah I was gonna say 30 shipped they yours to get them out of my garage lol. Don’t even have a bronco anymore