What Did You Do To Your Bronco Raptor Today? 🔧 🧰 🪛

[rgwinn]

Simple mod; xtra cup holder @StickerFab seems to be well made and fits my 20oz cup

OSD Grab Handle Cup Holder

Sponsored

 

[swamp2]

Moved the RTT from 4Runner to Raptor in preparation for the upcomming AZ and UT trip.

Also added American Adventure Lab M.A.S.S. floor kit (in prep for the incoming drawer/slide parts).

Two holes were tapped in the wrong spots on the cross beams. The new holes are not as strong since they partially overlapped with the bad holes... Quick drill and tap sorted it out. Shame on you AAL.

Got wiring added for my Dometic CFX55 IM refrigerator and also for my water pump for my in process potable water system. See here for that system I'm bringing to market.

High temp, OEM automotive grade, GXL polyethylene wires, genuine Techflex braided shield, heat shrink with adhesive and genuine 3M heat shrink ring terminals. Better than OEM .

Pro tip on getting wires through the grommet on the firewall. A small slit with a new, very sharp and narrow Xacto blade, then snap ring pliers to spread the slit and get clearance for the wire. I've done this many times and this was the best method yet, by far. Kudos to my son who discovered this. He didn't even know what snap ring pliers are but saw them and knew they would help.

 

[rgwinn]

Couple more additions to my Raptor;
1) MTI rear speaker pods with 6.5” Focal Flax Coax. Really improves the overall sound stage. Mid and bass are noticeably better
2) American Adventure Labs M. A. S. S. Shelf. Very well made and bolts right up to the bRaptor Roll Bar

stock pod vs MTI pod

 

[Spyder625]

4k round trip from NJ to Nova scotia road trip.. drove like a champ.. so just washing her from all the bugs and grime

 

[roadsterlife]

Couple more additions to my Raptor;
1) MTI rear speaker pods with 6.5” Focal Flax Coax. Really improves the overall sound stage. Mid and bass are noticeably better
2) American Adventure Labs M. A. S. S. Shelf. Very well made and bolts right up to the bRaptor Roll Bar

stock pod vs MTI pod

those speakers/pods look awesome. did you have to change any settings in ForScan or anything or just plug and play?

 

[rgwinn]

those speakers/pods look awesome. did you have to change any settings in ForScan or anything or just plug and play?

Plug n play. I reused the factory wiring. Just added spade connections for the speakers

 

[ju015dd]

took it to the river

 

[vrtical]

Installing a winch

 

[Raceguy388]

First oil change and oil separator install

 

[Bschurr]

First oil change and oil separator install

How did it go - quick & easy?

 

[Johnkn]

^^ I also installed my J&L can yesterday, it couldn’t be much easier.

It prompted me to empty the cans on 2 other vehicles......

.

 

[Ford Motor Company]

Installing a winch

Awesome mod! Thanks for sharing, Doug!

 

[RIDE]

Installing a winch

I like how that works with your stock setup and how it doesn’t look like you’d have to reposition all your sensors afterward. Is that how it worked out?

 

[vrtical]

I like how that works with your stock setup and how it doesn’t look like you’d have to reposition all your sensors afterward. Is that how it worked out?

Yeah a bit of a pain to partially disassemble the bumper to reroute the wires having to cut apart the harness for the two sensors that get moved to the new plate wish they would of just created a pigtail adapter instead. I tested the sensors once it was wired up and all seems good.

 

[RIDE]

Yeah a bit of a pain to partially disassemble the bumper to reroute the wires having to cut apart the harness for the two sensors that get moved to the new plate wish they would of just created a pigtail adapter instead. I tested the sensors once it was wired up and all seems good.

Do you loose much of your front camera angle?

Sponsored