- Joined
- Sep 9, 2021
- Threads
- 15
- Messages
- 298
- Reaction score
- 441
- Location
- Montreal, Qc, Canada
- Vehicle(s)
- Bronco Badlands
- Your Bronco Model
- Badlands
Again with the light bars...
Sponsored
How else do you see in the Starbucks parking lot (or for you, Tim Hortons)?? Ya need 41" tires and off-road bumpers and lights bars to make it through the parking lots!Again with the light bars...
With the Warn control pack relocation kit, you should have pretty much a full view. This is the actual pic from ADD's Wildtrack. Yes, I know I'm paying for the front camera with my upcoming Wildtrack Lux, but I wheeled years ago without a front camera and survived. I have front facing cameras on both my vehicles now and never use them. I think folks like to complain about something just to complain. The ADD Rock Fighter winch bumper is one of the cleanest ones on the market. Made in the USA too. Pay for quality. If this isn't the bumper for you, move along, no reason to run it down. That's why there are options. ADD has my order for one, in the works. More important to have a clean looking winch bumper on my Wildtrack than worrying about whether I can see out of my camera.I like it! Just curious, any chance you could provide a front camera view with the Warn winch installed?
Not gonna lie most of the addons I have seen left me less than impressed but I do like the look of this bumper very, very much. It would be nice though if they had one without the light bar in the center. But I am just being picky because I am not a big fan of light bars.
Dang your old...do you yell at kids to get off your lawn!Are there any pics with no lights installed? Just a pic of the bumper? I know I'm likely the exception. The reason I went ahead and asked you is that I like your bumper, better than others I've seen so far, and every new bumper that gets presented has all the lights installed in the pics. It would be nice to see just the bumper for us older guys, who still want to look cool, but don't need the lights.
Oh, and BTW, I also like the rear bumper.
Man that looks good! This is my #1 so far...going to wait until after the first to see what else drops from SEMA.With the Warn control pack relocation kit, you should have pretty much a full view. This is the actual pic from ADD's Wildtrack. Yes, I know I'm paying for the front camera with my upcoming Wildtrack Lux, but I wheeled years ago without a front camera and survived. I have front facing cameras on both my vehicles now and never use them. I think folks like to complain about something just to complain. The ADD Rock Fighter winch bumper is one of the cleanest ones on the market. Made in the USA too. Pay for quality. If this isn't the bumper for you, move along, no reason to run it down. That's why there are options. ADD has my order for one, in the works. More important to have a clean looking winch bumper on my Wildtrack than worrying about whether I can see out of my camera.
Man that looks good! This is my #1 so far...going to wait until after the first to see what else drops from SEMA.
I keep getting drawn to look at the front d-ring mounts...they look too low? Have you seen this in person? Are they clearanced enough? Are they that low to protect the intercooler vents? Maybe if they are up on the face below the parking sensor they interfere?
Ha! No, I like kids!Dang your old...do you yell at kids to get off your lawn!
Just buy the lights, of course it will look like crap without them and man you are right when that guy behind you on the trail can be seen from space you realize every reflective surface on your rig and in front of you! I would fill this baby with lights and turn them on once a year at New Years!
There isn't that much steel in that bumper. Once the design is finalized the parts can be cut out with a plasma cam, then all you need is a welder. Way overpriced but for the guys that paid 10-15k over MSRP for their Bronco they can buy one.It's not for everybody but you gotta pay for quality. This isn't your overseas made bumper don't forget. Steel has gone up 2x what it was a year ago, thus the price on a lot of these bumpers
This doesn't apply to most but I checked with the manufacturer and they do rate the clevis mounts for highway flat towing. This will save me almost $600 over the Blue Ox mounts when setting my Bronco (which is due next week) up to tow behind our RV. So it's like a $600 discount on a great looking bumper or at least that's what I told my wife.For those who are looking for a sleek, low-profile front bumper for their 2021 Bronco, the Stealth Fighter hits the mark. Designed for performance and clearance off-road, it also brings bold styling to the front end. At the center of the bumper are inset mounting points for up to a 30-inch radius light bar, or 8 cube lights. Towards the ends of the bumper are 2 additional inset mounting points, that can take a cube light each. This design retains the OEM parking sensors, and we include plugs if your model does not have sensors. Our adaptive cruise control relocation bracket is available as well.
The bottom panel features louvers to allow airflow to the intercooler. We designed a 3/16-inch aluminum skid plate to replace the factory plastic skid plate. This is an optional feature, as you can retain the factory skid plate with the Stealth Fighter bumper. There are 2 reinforced clevis mounts that take 3/4-inch D-Rings, that provide recovery options if you manage to get stuck in the mud, sand, or snow. As always, this Bronco front bumper is fully bolt-on and Made in America.
https://www.4x4truckleds.com/addict...022-ford-bronco-stealth-fighter-front-bumper/
- Low Profile Radius Plate Steel Design
- Universal Light Mount for Up to 30-Inch Radius Light Bar or 8 Cube Lights
- One Cube Light Mount Behind Each Side Panel
- Optional 3/16" Aluminum Skid Plate
- Vented Lower Panel with Louvers for Intercooler Airflow
- Retains OEM Parking Sensors, and Includes Plugs for Non-Sensor Models
- Reinforced Clevis Mounts for 3/4" D-Rings
- Adaptive Cruise Control Relocation Bracket Available Separately
- Fully Bolt-On
- Made in America
- Hammer black powder coat finish
- Satin black powder coat panel finish
- Mounts for 30-Inch Radius Light Bar and 2 Cube Light
Secure your spot in line by ordering one from us here: https://www.4x4truckleds.com/addict...022-ford-bronco-stealth-fighter-front-bumper/
Couldn't you tow with these mounts for flat towing?This doesn't apply to most but I checked with the manufacturer and they do rate the clevis mounts for highway flat towing. This will save me almost $600 over the Blue Ox mounts when setting my Bronco (which is due next week) up to tow behind our RV. So it's like a $600 discount on a great looking bumper or at least that's what I told my wife.