- Thread starter
- #1
So I’ll start with I’m not the brightest and I have also bought an air horn for fun with the kids ( they are 8 and 10 and they, with their fiends, love to give the honk signal to cars so I thought I would surprise/maybe scare them! Worth 60 bucks and 15 mins in my opinion)…. However, I don’t know how to wire with the aux switches, maybe… I would like to wire to an unused aux switch until it is needed for lights. I already have 3 lights that I have wired up so I kinda get it, but I want to check with folks that are smarter than I… Attached is the the instruction. And some pics… I am thinking I should follow the b-1 positive control as I am not replacing the existing horn as I plan to leave that in tact for normal us and only use the air horn for fun/when I am really mad.
so here are my questions…please confirm.
Last question, if I want to do more than one horn can I just wire all this to the same aux switch? Any overload issue?
Thanks for any help!
so here are my questions…please confirm.
- I have a black wire that is not noted on the wiring instructions, which is weird. why not note that… but black directly to neg battery term.
- Got yellow figured out
- White to one of the many ground screws points?
- Blue to an aux switch pre ran wire?
- Red to battery term
Last question, if I want to do more than one horn can I just wire all this to the same aux switch? Any overload issue?
Thanks for any help!
Sponsored