Air pressure 35" x 12.50"

[_Nelson_]

What pressure will give the smoothest ride on 35x12.50's? I've read on jeep forums 30psi. But I know Bronco is heaveir. I'll never take it off road I just want to smooth out and already unbelievablly smooth ride

Sponsored

 

[ryannshit]

I am interested in seeing what folks say here as well.

I'm at 40 psi on nitto ridge grappler all terrains and am loving the smoothness compared to the stock 33" mud Terrains I had on my badland that were also at 40 psi. But I've seen others on youtube run at much lower psi.

 

[kodiakisland]

Assuming y'all are talking about 35X12.50R17LT, this is the following weight rating:
30 PSI is 2155lbs
35 PSI is 2405lbs
40 PSI is 2625lbs

I think I'd be starting at 30PSI if it was on my Bronco, but I'm also no where near GVWR.

 

[Happy]

Our chalk test showed our 35's got a full chalk line across the tread at 30.
We started at 35 psi and reduced by 1 psi until the line got where we were happy!
They are Mickey Thompson E rated.

 

[Locolowlow]

What pressure would you use if you don’t go off roading. I mostly just drive on streets and highways.

Sponsored