Best Lift Kits for Bronco 2022 Black Diamond?

[Bing]

Fellas,
Hoping to get some context, just received my Bronco and I've been researching lift kits. I'm thinking only a 3" - 3.5", man are they pricy - no doubt due to lack of supply and options. Anyone have any recommendations?

Thanks much!

Sponsored

 

[RagnarKon]

The big problem is independent front suspension. Once you get above 2” lift you’re going to start having geometry problems, therefore you’re going to start having to replace control arms. Once you do that, it’ll get expensive in a hurry. So if you are willing to stay below 2”… you’ll find yourself with a lot more options that are also much more economical.

But anyway, to answer the question, I think the “best” kits are made by ICON.… but also… very pricey. A more economical option are kits made by Zone Offroad. If you want the most economical option, it’s probably going to be Rough Country’s kits.

 

[Dmorty217]

Some companies you’re paying for the name like everything else in life. I went with the eibach coilovers and zone off-road UCA and fabtech rear lower links. Also just received my core 4x4 rear track bar. All in with install and alignment it cost me just under 4k.

 

[Bing]

Nice, looks very sharp! Thanks or the req's guys, much appreciated.

 

[Oldhippie]

since You have the standard suspension better coil overs are in order with bigger tires...bilstein 6100s and zone upper arms would be my pick bang for the buck.

 

[Garemlin]

Some companies you’re paying for the name like everything else in life. I went with the eibach coilovers and zone off-road UCA and fabtech rear lower links. Also just received my core 4x4 rear track bar. All in with install and alignment it cost me just under 4k.

What size tire are you running?? I see they are Toyo R/T.

 

[VIRUS]

Some companies you’re paying for the name like everything else in life. I went with the eibach coilovers and zone off-road UCA and fabtech rear lower links. Also just received my core 4x4 rear track bar. All in with install and alignment it cost me just under 4k.

Should have opted for the optional oars

 

[Dmorty217]

What size tire are you running?? I see they are Toyo R/T.

315/70/17

 

[SoCalG]

315/70/17

I have the same wheels on my Black diamond and absolutely love them! Did you have to run a wheel spacer to get the tires to fit? Great looking rig!

 

[kodiakisland]

Not knowing what you consider pricey, I found a lot of value in the Icon IR coilovers for my Black Diamond. I'd also look at upgrading rear arms and track bar as well.

 

[Dmorty217]

I have the same wheels on my Black diamond and absolutely love them! Did you have to run a wheel spacer to get the tires to fit? Great looking rig!

I did put spacers on because I like the poke, so I don’t know if they would of fit without. I think they would have, had to remove the crash bars though.

 

[Mjolnir]

Some companies you’re paying for the name like everything else in life. I went with the eibach coilovers and zone off-road UCA and fabtech rear lower links. Also just received my core 4x4 rear track bar. All in with install and alignment it cost me just under 4k.

With the suspension changes, what was your overall increase in ride height? I’m wanting to upgrade suspension but I don’t really want to get above 3” increase.

 

[Dmorty217]

With the suspension changes, what was your overall increase in ride height? I’m wanting to upgrade suspension but I don’t really want to get above 3” increase.

2.6” with the Toyos and another 3” with the coilovers. I would easily adjust the coilovers to give me less lift if I wanted to.

 

[Bronco_joe]

I have a set of used 4wp coilovers for sale if interested. Save ya some money @Bing

 

[Caleb@PandaMotorworks]

Fellas,
Hoping to get some context, just received my Bronco and I've been researching lift kits. I'm thinking only a 3" - 3.5", man are they pricy - no doubt due to lack of supply and options. Anyone have any recommendations?

Thanks much!

Hey! We have a few great options in stock. Id be happy to get you a deal on either of them!

The unicorn: Fabtech 2021 Ford Bronco 4WD 3in Uniball UCA System w/DL 2.5 Resi Coilovers & Rear DL Coilovers
We had a surprise set of these come into stock yesterday. These are usually on a pretty significant back order, so someone gets to skip the wait

Our new kit: PMW Off-Road Stage 1 Coilover Kit (Fits 21+ Ford Bronco)
Includes Eibach Pro-Truck 2.0 Coilovers and Zone Offroad Upper Control Arms at a discounted bundle price.

Sponsored