- First Name
- Umid
- Joined
- Apr 29, 2025
- Threads
- 3
- Messages
- 15
- Reaction score
- 18
- Location
- Winnipeg, MB
- Vehicle(s)
- 2022 Ford Bronco Big Bend
- Your Bronco Model
- Big Bend
- Thread starter
- #1
I did a mod by adding a short (2ft long) extension cord and tucking it under the grill and front cover. See the pictures and let me know if you see any issues. Initially i tucked it closer to the middle but it was interfering with movements of the active louvers so I brought it up closer to the top. I filmed it and it seems fine now (I think). Maybe this is something someone will find useful OR let me know if I am out to lunch so I can get rid of it.
PS: I also 3D printed a TPU prong cover which I will place a link to.
Amazon 2' extension cord: https://www.amazon.ca/dp/B0C7BY89PB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
3D printed part: https://www.thingiverse.com/thing:4699240
PS: I also 3D printed a TPU prong cover which I will place a link to.
Amazon 2' extension cord: https://www.amazon.ca/dp/B0C7BY89PB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
3D printed part: https://www.thingiverse.com/thing:4699240
Sponsored