While not 100% consealable, these seem to be more "forgiving"I just took my front license plate bracket off and the dealer had drilled 2 holes right into the metal. Attached is a pic of the holes with the metal screws, Does anyone have any ideas to conceal these? This bracket was right in the middle of the grill and looked terrible. I live in a state that requires the front plate and I’m moving it to the bottom. Thanks for the help.
And you could paint them to match...While not 100% consealable, these seem to be more "forgiving"
Thanks guys - where can you buys these? If they’re black from the factory that will work since I have the mod bumper.
Order is placed plus the plugs below someone recommended - 1 of these should work - thanks!
But from that picture you posted, they drilled into the painted, eruption green, lower valance, below the grill?
That’s correct - they drilled into the painted lower variance. The bumper plugs won’t work in this area?
Not sure, but you'd want to paint them, unless you're okay they stay black.
You can order them in the OEM color - there’s a selection for Eruption Green but I see your point - they’re made for bumpers but I need them to work in this fascia / trim piece.Not sure, but you'd want to paint them, unless you're okay they stay black.
Just checked them out. Those should work just fine! If anything, you'll just need to drill a bigger hole.
There’s an option to order the drill bit which I did to cover that base - thanks for checking it out
