Enabling Intelligent Adaptive Cruise Control and Lane Centering

[Strizzo]

Yeah, I'm just trying to figure out who provided instructions so far that has got it fully working.

I posted it somewhere earlier.

Sponsored

 

[Spicygb]

Is this working on the 2.3 yet?

 

[ptgptg]

2023 OB Lux. Did the two change (BCM and ABS) method, and relearn out of an abundance of caution. No luck. Saw someone mentioned doing a reset of the APIM. Will try that next.

 

[SkiSquatch]

Which mod were you trying to change, adaptive cruise w/ stop and go?
That's these:

1. BCM change cruise control to adaptive Cruise Control, Stop & Go
2. ABS 760-03-01 to F*** ****,
Last:
3. PCM relearn

 

[ptgptg]

yes, and that's exactly what I did. Not sure why it didn't take. will try an APIM reset as I saw someone reference doing that reset in order to get the APIM talking to everything else.

 

[ptgptg]

not sure what I did this time around that was different, but got it working. I essentially redid all the original steps and once i relearned the PCM module, I had the intelligent CC option. Thank you to all who worked on getting this up and running.

 

[cake]

Is this working on the 2.3 yet?

I’ve spent a couple hours on this trying all sorts of options and relearns and didn’t get anywhere. AFAIK, I’ve been the only 2.3L Owner working on it.

 

[Kach Vartan]

I was able to get Auto Hold to work, although only tested briefly in the confines of my garage. As others noted, it was just a matter of enabling the feature in the easy version of Forscan in the APIM and IPC sections. I don’t know if any of my preceding changes to enable stop and go function are required for auto hold. Will test more in coming days.

 

[ewf66]

I was not able to get ACC with Stop & Go to work following steps above. I have the bronco raptor MY23. Any ideas?

 

[Neigh]

I was not able to get ACC with Stop & Go to work following steps above. I have the bronco raptor MY23. Any ideas?

Did you get any errors or codes during the process?

 

[KhoiPhish]

Which mod were you trying to change, adaptive cruise w/ stop and go?
That's these:

1. BCM change cruise control to adaptive Cruise Control, Stop & Go
2. ABS 760-03-01 to F*** ****,
Last:
3. PCM relearn

Do I literally put F*** ****? with the stars lol

 

[SkiSquatch]

Do I literally put F*** ****? with the stars lol

Uch! Yea, only change that first letter to an F!

 

[ewf66]

Did you get any errors or codes during the process?

Yes. no pre collision warning and no abs brakes and one/two other warnings but that all cleared when i performed the TCB relearn.

 

[Neigh]

Yes. no pre collision warning and no abs brakes and one/two other warnings but that all cleared when i performed the TCB relearn.

Ok, that's good. So what behavior is it exhibiting that makes you say it isn't working?

 

[ewf66]

Ok, that's good. So what behavior is it exhibiting that makes you say it isn't working?

I was only able to switch ACC on at low speeds but it never activated (turn green) showing it was on. the icon stayed white and i was not able to activate ACC above 20 MPG.

Sponsored