Fender screw

[gmoolah]

Does anyone know the exact part number for this specific fender screw? I’ve checked multiple websites, but it always seems to show up as a variant type.

Sponsored

 

[helifino16]

See the #2 post on THIS THREAD. You can really use any kind of push pin panel holder. Amazon sells them by the box. Buy a box and replace them all and you’ll still have plenty of spares.

 

[gmoolah]

I’d prefer to have the actual screw. Some Ford parts store sell the variants. I am wondering if anyone has some extras.

 

[Ducati1098]

W720511-S450B

 

[ssls6]

Ducati1098 you're a solid dude for helping Bronco owners like this. Not many would.

 

[gmoolah]

W720511-S450B

close enough but not the actual screw.

 

[Ducati1098]

close enough but not the actual screw.

Yeah there’s 2 different ones there for some reason. Too hard to see on the parts catalog which exact one you needed. But I knew they were both close enough.

 

[gmoolah]

Yeah there’s 2 different ones there for some reason. Too hard to see on the parts catalog which exact one you needed. But I knew they were both close enough.

Should be the screw that attached the fender liner.

 

[Ducati1098]

Should be the screw that attached the fender liner.

Yes. Like I mentioned, there are 2 different screws for that. Your original picture is so close up it was difficult to tell which one it was

One is 4.2 x 22mm, one is 4.2 x 25mm, so they’re practically the same.

 

[Valhalla]

 

[gmoolah]

Yes. Like I mentioned, there are 2 different screws for that. Your original picture is so close up it was difficult to tell which one it was

One is 4.2 x 22mm, one is 4.2 x 25mm, so they’re practically the same.

What is the part # of HR1?

 

[Ducati1098]

What is the part # of HR1?

That’s the one I gave you.

 

[Oldhippie]

I got sick of those things and replaced them all with nutserts and real screws…

Sponsored