First purchase for the new AMB 2 door: Ranger Raptor wheels

[johnbasler]

I like these wheels and definitely look forward to seeing these on your truck. If I change my order to base I would look at doing them as well, but I’d probably stick with 265/70R17 tires because of the 2.3L manual.

As for load rating on the stock tires, the stock tires on my Tacoma (112) exceed the stock tires on my 2000 Expedition (108) , so it’s very possible the Bronco stock tires will have sufficient rating for the Suburban.

yeah, I think with 300 horsepower, a 4.46 axle ratio and a stick shift it will be fine turning these. You mention your Taco - I have had several early Toyota trucks with a 22r (all of 100 horsepower!) with 33s and even it was fine...

Sponsored

 

[stuckinohio]

I wish they'd hurry up and get your Bronco to you so I can see these mounted!

 

[Beach_Bum]

While you are waiting for you steed, can you take a few pictures of the tires and wheels from not only the side that you showed above but from the inside view of the wheel and straight on to see the tread of those Falken Wildpeak M/T?

 

[CarreraX]

Question. I didnt know they made a Ranger Raptor yet?

 

[Beach_Bum]

Question. I didnt know they made a Ranger Raptor yet?

The parts are available. The vehicle itself is not available in the US. Australia has a Ranger Raptor.

 

[johnbasler]

The parts are available. The vehicle itself is not available in the US. Australia has a Ranger Raptor.

Correct - I ordered these from Summit Racing - they are a Ford Performance Parts kit that comes with the TPMS sensors and a calibration tool. Wheels are the same pieces used on the global Ranger Raptor that is not sold in the US.

 

[BroncoAZ]

Correct - I ordered these from Summit Racing - they are a Ford Performance Parts kit that comes with the TPMS sensors and a calibration tool. Wheels are the same pieces used on the global Ranger Raptor that is not sold in the US.

So will some of us need to buy and break up a set to get spares?

 

[gentlemanbronco]

Get out of my head! Literally looked these up a few months ago and was curious about them as well. good pick up!

 

[johnbasler]

So will some of us need to buy and break up a set to get spares?

They sell singles as well. Like I said - I want to check out the spare mount before I decide what to do.

 

[CyberBronco]

They sell singles as well. Like I said - I want to check out the spare mount before I decide what to do.

I like. Can’t wait to see mounted

 

[HoosierDaddy]

Jeezus H ... we built the same exact rigs, want/bought the same Raptor wheels, the rigs were built on the same day and they are both being held hostage by Ford.

Too funny. We can never show up to the same Bronco event at the same time, LOL.

 

[Roll Sound]

The Ford dealer was kind enough to mount these up for me. Hopefully the Bronco arrives soon . (Scheduled for 7/5 build as of now)

Those look nice!

 

[jcwr1313]

yeah, I think with 300 horsepower, a 4.46 axle ratio and a stick shift it will be fine turning these. You mention your Taco - I have had several early Toyota trucks with a 22r (all of 100 horsepower!) with 33s and even it was fine...

i Just picked up my 4door Black Diamond with steel wheels Tuesday. I have a set of the Ranger Raptor wheels too. Just waiting for tires to come in. Are you just going to re-use the lug nuts that come on your Bronco or do you think we’ll need to get different ones to mount the wheels?

 

[Broncola]

Did you mount these wheels yet? Really want to see them on a bronco!

i Just picked up my 4door Black Diamond with steel wheels Tuesday. I have a set of the Ranger Raptor wheels too. Just waiting for tires to come in. Are you just going to re-use the lug nuts that come on your Bronco or do you think we’ll need to get different ones to mount the wheels?

 

[johnbasler]

Did you mount these wheels yet? Really want to see them on a bronco!

My Bronco is still trapped on Dirt Mountain. Mounted wheels and tires are still sitting in the garage.

Sponsored