Gearshade Mesh top

[Bradley Thornton]

I have the soft top and the mesh top works great also keeps the soft top out of the second row the it is open.

Sponsored

 

[CPTRK]

I have a hard top that I need to do some more fitting with tomorrow. But you'll be able to leave at least the rear half of the mesh on. There is a lot of room between the roll bars and the roof. But you just have to use some of the t50s to secure the top. And the front row tops of a 2 door, those will kinda be not awesome to secure the middle locks. But otherwise, yea you should be able to leave it mostly on. I'll get pics tomorrow. It's been a long day

I worked it out to leave the whole mesh on under the hardtop - just have to undo a few bungees to reach under to the latches and take top panels off. Very convenient/cool to leave it on under MIC.

 

[CPTRK]

I've been waiting on gearshade to get the hardtop version ready for release. Emailed yesterday for an updated as I've requested a customer printed version. Very prompt in reply that the hardtop has been causing them some challenges and at present they don't have a solution to keep it on while the hardtop is in place. You will need to remove prior to reinstalling the hardtop.

I have mine installed permanently under the hard-top no problems - easy to pop a few bungees to reach latches.

 

[zjc26138]

I might have to get one of these once my Bronco arrives.

So I can leave it installed with the soft top covering it? That’s how I read it.

 

[JediMcMuffin]

I’m curious to see a gear shade in person. My only gripe with the Bimini is having to undo the snaps to raise or lower the soft top. However it doesn’t have that gap at the front

 

[Bradley Thornton]

I might have to get one of these once my Bronco arrives.

So I can leave it installed with the soft top covering it? That’s how I read it.

Yes never have to take it off.

 

[zjc26138]

Yes never have to take it off.

That’s pretty sweet.

 

[Bradley Thornton]

I’m curious to see a gear shade in person. My only gripe with the Bimini is having to undo the snaps to raise or lower the soft top. However it doesn’t have that gap at the front

No it has just enough gap in the front.

 

[ryridesmotox]

I might have to get one of these once my Bronco arrives.

So I can leave it installed with the soft top covering it? That’s how I read it.

I have to defer that to the soft top guys. I'm a 2 door so I have a MIC. But it fits under the MIC

 

[Ahauser2010]

I worked it out to leave the whole mesh on under the hardtop - just have to undo a few bungees to reach under to the latches and take top panels off. Very convenient/cool to leave it on under MIC.

This was my concern. So no problem with putting the hard top back on without taking the entire mesh off?

 

[CPTRK]

This was my concern. So no problem with putting the hard top back on without taking the entire mesh off?

Nope - no problem - just pull a few bungees to reach and close/open hardtop latches (esp middle latch between row 1 & 2)

Sponsored