GOBI Bronco Rack Released [Official Specs & Photos]

[Rebecca Tiffany]

Yes they said all the racks are the exact same, the soft top just has a different ladder and the Raptor connects to the back panel instead of using pivot arms but they use the same rack for all 3 models

Sponsored

 

[GrumpyVet]

These measurements are all over the place. I filled in what I'm getting out of my trusty measuring tape. Also checked from the lower edge of the passenger roof panel and had 11-1/4"

 

[Rebecca Tiffany]

These measurements are all over the place. I filled in what I'm getting out of my trusty measuring tape. Also checked from the lower edge of the passenger roof panel and had 11-1/4"

Hmm do you have the older or “newer” taller version?

 

[GrumpyVet]

Hmm do you have the older or “newer” taller version?

I have the test build before product was available.

 

[Rebecca Tiffany]

Oh that might be why!

 

[GrumpyVet]

Oh that might be why!

Yes but GOBI has said not much changed. They raised it up a smidge to accommodate the soft top. My guess is the newest rack is just an inch above the numbers I posted.

 

[Rebecca Tiffany]

Those pictures with dimensions came from Gobi. I had seen a lot of people say the new one was 4” taller but it’s not it’s just 1” taller they said. I’m glad I confirmed about the height to top of the light bar because their new spec sheet said 12” from the top of the hardtop But it’s not he said they didn’t draw the line to the right place and it’s only 8” from the top of the hard top

 

[Inlinejohn]

@GOBI Racks

Any updates on side accessory rack design? What does the 4runner version look like and how mounts?

 

[Trevor 2023 Base build]

They are 4.7" but I suspect will need some semi-custom mount to offset a little...maybe. The most outer diameter of the light is 4.7" but it gets narrower towards the rear of the light housing.

I think they'd protrude forward much less than the 50" bar

If you end up trying this can you post some pics or update if it works? I want a similar setup but cant afford KC.

 

[Inlinejohn]

If you end up trying this can you post some pics or update if it works? I want a similar setup but cant afford KC.

Already done. When I finally mount to Bronco I might try to fit 2 more. Still undecided

 

[Trevor 2023 Base build]

Already done. When I finally mount to Bronco I might try to fit 2 more. Still undecided

That looks really nice! Thanks for sharing!

 

[GOBI Racks]

@GOBI Racks

Any updates on side accessory rack design? What does the 4runner version look like and how mounts?

Hey there! Unfortunately, I do not have an update for completion quite yet nor a release date for the 4runner! Im waiting on part of the team to verify timely release!

 

[GrumpyVet]

For those looking for a snorkel that will work with their GOBI rack Mishimoto makes one that’s a great fit.

 

[Inlinejohn]

For those looking for a snorkel that will work with their GOBI rack Mishimoto makes one that’s a great fit.

You did it??

 

[GrumpyVet]

You did it??

Yup. Took everything apart yesterday was about 90% sure it would fit then woke up this morning and started cutting my fender.

Sponsored