Just a thought:I’ll see if I can make this work.
https://www.amazon.com/dp/B08B5T84T...uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Sponsored
Just a thought:I’ll see if I can make this work.
Another idea:I’ll see if I can make this work.
You could always find a taller wife…
The replacement kayak handles look like they could work.
Pic of top of the bar. Anything mounted here and slung over the side would have to be drilled and tapped. There were pre-tapped (welded nuts) further towards the second row but they wouldn't work for the first row. The clearance above the bar and between the soft top is over an inch but not sure about the MIC.
I am going to see if the kayak handle works with those two screws.What about using the two screws that are already there on the inside of the roll bar?
I personally wouldn't screw around with that ( pun intended ). You may not be blocking the airbag but you're certainly going to change how it deploys.I am going to see if the kayak handle works with those two screws.