Help with decal placement

[UniBroncorn]

Does anybody have information from Ford exactly where the OEM raptor hood and quarter panel decals are to be placed?

Thank you

Sponsored

 

[swamp2]

Are you talking about the larg, factory, decorative stickers, loosely a checkered appearance? Regardless, there are no hood decals.

 

[UniBroncorn]

Are you talking about the larg, factory, decorative stickers, loosely a checkered appearance? Regardless, there are no hood decals.

Yes I am

 

[swamp2]

My bad, I do see some hoof stickers. Maybe those were limited to one year only? Good luck with you search.

FMC has some form of tooling to get these applied consistently. Your best best is probably to get some measurements from someone locally or here on the forum.

 

[Grumpy]

Why don't you do a search on here for BRaptor, there is plenty of pics with side shots to show you where they are placed. The only ones for the hood i recall were the small angled graphics to match the rear quarters.

 

[the poacher]

Does anybody have information from Ford exactly where the OEM raptor hood and quarter panel decals are to be placed?

Thank you

Ask and ye shall receive. Here is the install from Underground Graphics, pretty much identical to the OEM kits...
How To Install Your Bronco Braptor Kit | From Underground Graphics - YouTube

 

[DallasCajun]

Why don't you do a search on here for BRaptor, there is plenty of pics with side shots to show you where they are placed. The only ones for the hood i recall were the small angled graphics to match the rear quarters.

‘Like’ - Looks just like the one I have in my garage…and my garage…and my BRaptor. Oh Wait! That’s because it is my garage and BRaptor

But seriously…the post about Underground Graphics is the way to go.

 

[Grumpy]

@DallasCajun
Yes sir, just did a quick search to example the OP. But I specifically remembered yours from when you first posted the beauty.

 

[UniBroncorn]

@DallasCajun
Yes sir, just did a quick search to example the OP. But I specifically remembered yours from when you first posted the beauty.

I just want to be able to give a schematic to a decal shop which outlines the exact placement of decals that way they don't have to internet measure/guess etc.

 

[Johnny Mo]

I just want to be able to give a schematic to a decal shop which outlines the exact placement of decals that way they don't have to internet measure/guess etc.

Normally the OEM graphics would come with some sort of alignment template or notches on the transfer paper. I bought a simple trunk sill guard (OEM) and it had alignment notches and instructions with it.

There's some listed in this list - maybe it can help... look under free resources >> instruction sheets
https://www.motorcraftservice.com/InstructionSheets/Get

Or check with the Ford Performance guys on chat - they will email you if they have a document for it.

 

[UniBroncorn]

Does anyone know the part numbers for the Bronco Raptor full decal kit (6 pieces total)

Thank you

Sponsored