How to: 2 Door Rear Seat Removal

[PacosTacos88]

It's pretty simple but I made a little write up anyways. Only thing is you'll get a seat belt fault code at startup. No annoying chime or anything. If anyone finds a bypass to that let me know!

Ignore my chicken scratches. I will try a more formal write up later tonight

Sponsored

 

[PacosTacos88]

Also, if you're looking for rough rear seat dimensions to make a box or flat lay down area, these are my dimensions

 

[ITLRUN]

I removed mine yesterday. Very easy to do. Are you going to remove the rear seat belts too?

 

[Huxley602]

This was a great help! Did anyone find a workaround to plug something into the seat belt wires to dead end it and shut off the ABS warning light?

 

[mustanggarage]

This was a great help! Did anyone find a workaround to plug something into the seat belt wires to dead end it and shut off the ABS warning light?

I know this is an old thread, but I have been researching this because I just learned my 2 door has a build date. anyway I have been looking at the goose gear seat delete plate system and in there instructions they show removing the seatbelt recepticle from the seat and plugging it back in to stop the error code. https://www.dropbox.com/s/vk3r7wo0g...co_2021-Present_2-Door_SeatDelete_V1.pdf?dl=0

 

[DUSTYcazOREGON]

It's pretty simple but I made a little write up anyways. Only thing is you'll get a seat belt fault code at startup. No annoying chime or anything. If anyone finds a bypass to that let me know!

Ignore my chicken scratches. I will try a more formal write up later tonight

Any issues with unplugging that seat??? Did you do anything here? Thanks for this info. I may remove the passenger side rear seat so as to fit a dog crate in there. Thanks!

 

[MFP2241]

Does anyone know what the internals of the buckle look like? is the computer looking for continuity, if so can you just install a jumper wire in the plug?

 

[Huxley602]

I know this is an old thread, but I have been researching this because I just learned my 2 door has a build date. anyway I have been looking at the goose gear seat delete plate system and in there instructions they show removing the seatbelt recepticle from the seat and plugging it back in to stop the error code. https://www.dropbox.com/s/vk3r7wo0g...co_2021-Present_2-Door_SeatDelete_V1.pdf?dl=0

Thanks so much! Finally got time to do it and it worked like a charm!

 

[mark1031]

Does anyone know what the internals of the buckle look like? is the computer looking for continuity, if so can you just install a jumper wire in the plug?

Did you ever figure that out?

 

[MFP2241]

Did you ever figure that out?

Unfortunately, no.

When I removed the back seats, I just removed the buckle. It wasn't as painful as I thought it would be, and, there is a dedicated spot for it under the carpet.

 

[Bikeric]

Did you ever figure that out?

You need to remove the buckle from the seat and plug it in. There is a perfect pocket made to hide it.
If you remove the belts as I did, you need to install a 2.4ohm resistor into the plug.

 

[Donkeygyrl]

These diy seat deletes are way better than that goose gear trash ,cheaper too.

 

[kodiakisland]

Yeah, I just used a cheap 1/2 inch rubber mat I had handy. Cleans up easy. Has had oil, gas, dog pee, and who knows what else on it. One of these days I'll find a nice diamond plate rubber mat to put back there.

 

[mark1031]

You need to remove the buckle from the seat and plug it in. There is a perfect pocket made to hide it.
If you remove the belts as I did, you need to install a 2.4ohm resistor into the plug.

Awesome!!! Thank you, exactly what I was looking for. Sure wish Radio Shack was still around. Amazon wants me to buy 100 of them. lol

 

[Butzy]

You need to remove the buckle from the seat and plug it in. There is a perfect pocket made to hide it.
If you remove the belts as I did, you need to install a 2.4ohm resistor into the plug.

Yes! We need more guinea pig broncos like this to experiment on!

Sponsored