Mabett is selling and developing hundreds of products

[Mabett]

@Mabett are you working on canvas or waterproof material Bimini top that covers all gaps around the windshield and window/rollbar area? This would be great for pop up storms.

@Mabett, many of us just need hardtop crossbars occasionally to carry a kayak or paddle board. Are you working on a product for this? If crossbars only is not possible since there are no rain gutters on the top, we could benefit from you producing a nice set of roof side rails where we could attach our own Yakima or Thule crossbars.

If crossbars only is not possible since there are no rain gutters on the top

I want to know what this sentence means

Sponsored

 

[Mabett]

Are you working on non sas mudflaps too?

Non Sasquatch has been tested and fits perfectly

 

[Brad Fx]

If crossbars only is not possible since there are no rain gutters on the top

I want to know what this sentence means

This is a Jeep example of how crossbars attach to the hardtop rain gutters. The Bronco doesn’t have the rain gutters so I’m not sure if this crossbars only option, without side rails, is possible. It would be nice if someone made it possible.

An alternative would be to make side rails only, circled below, where people could attach Yakima or Thule crossbars they already have.

 

[mjkrawczykjr]

Non Sasquatch has been tested and fits perfectly

When will the mudflaps (non sas) be available for sale? Thanks

 

[Planet_Express_IV]

When will the mudflaps (non sas) be available for sale? Thanks

Yup no one else has yet released flaps for the tube steps without Sasquatch so it's an untapped market.

 

[skierx728]

@Mabett ... I just received my "gear side storage" tray last night (ordered through Amazon). It came in an impressively small 6x6 box curled up into a loop... i took it out of the box and applied the tiniest amount of pressure to it to start to flatten it out for install and it snapped in half immediately (I hadn't even taken it out the bag yet).
Should I request a refund through amazon? I'd be fine w/ a replacement if it can be shipped in a flat box maybe to prevent this? I'm honestly not sure how it was put into the box w/out snapping in half to begin with.
This is not the first product I've ordered from you guys (I have the center console organizer and seat back protectors which both I'm very happy with).
Let me know how to proceed. Thank you.

 

[Landin536]

I’m

sure
[/QUOTE100% interested in something like this

 

[Mabett]

When will the mudflaps (non sas) be available for sale? Thanks

in production

 

[Mabett]

@Mabett ... I just received my "gear side storage" tray last night (ordered through Amazon). It came in an impressively small 6x6 box curled up into a loop... i took it out of the box and applied the tiniest amount of pressure to it to start to flatten it out for install and it snapped in half immediately (I hadn't even taken it out the bag yet).
Should I request a refund through amazon? I'd be fine w/ a replacement if it can be shipped in a flat box maybe to prevent this? I'm honestly not sure how it was put into the box w/out snapping in half to begin with.
This is not the first product I've ordered from you guys (I have the center console organizer and seat back protectors which both I'm very happy with).
Let me know how to proceed. Thank you.

It's a pity that this happens, you can return the whole package and buy it again, I just do it to save on shipping, I don't even make money selling them now (on promotion), if I flatten them to pack and ship , would incur expensive shipping and would have me having to sell it for $40 or even $50

 

[Mabett]

This is a Jeep example of how crossbars attach to the hardtop rain gutters. The Bronco doesn’t have the rain gutters so I’m not sure if this crossbars only option, without side rails, is possible. It would be nice if someone made it possible.

An alternative would be to make side rails only, circled below, where people could attach Yakima or Thule crossbars they already have.

Thank you, I will choose the second method first and list the first method as my research and development direction

 

[Mabett]

I've done all the tests on the Mud Flap, Sasquatch and without Sasquatch
The blue car is my black diamond, no Sasquatch, the silver-grey Bronco has Sasquatch
Please watch the installation video I made with Gopro

• Fits full size BRONCO with tube steps and rock rails
• I'm going to sell it for $139.99 for 4-pieces, the price for fans is $119.99

I'm now wondering how many people would accept this installation step and price?
How many people will only need the front wheel or the rear wheel?
NOTICE

• 1966 will be removed in the final version
• Don't need to remove the fenders and inner lining to install mud flaps, but to make it easier to shoot, I removed the wheel brows and inner lining, when you install these mud flaps, you have to lift the inner lining to see the part in the video Holes, which are hidden on the other side of the lining

 

[airishfan]

I've done all the tests on the Mud Flap, Sasquatch and without Sasquatch
The blue car is my black diamond, no Sasquatch, the silver-grey Bronco has Sasquatch
Please watch the installation video I made with Gopro

• Fits full size BRONCO with tube steps and rock rails
• I'm going to sell it for $139.99 for 4-pieces, the price for fans is $119.99

I'm now wondering how many people would accept this installation step and price?
How many people will only need the front wheel or the rear wheel?
NOTICE

• 1966 will be removed in the final version
• Don't need to remove the fenders and inner lining to install mud flaps, but to make it easier to shoot, I removed the wheel brows and inner lining, when you install these mud flaps, you have to lift the inner lining to see the part in the video Holes, which are hidden on the other side of the lining

not vary cool looking are they ,but there no way to make mud flaps that are .

 

[redone17]

Thank you, I will choose the second method first and list the first method as my research and development direction

I’m interested in mounting plates using the welded nuts on the roll bar for crossbars like these:

https://yakima.com/products/jetstream?variant=30947596599344

SMS Exposed Racks use this method for their system - but, I prefer this style of crossbar and track mounting.

I saw River Outdoors created their own - but, it doesn’t seem like they plan to produce them.

 

[ldcobb2]

I've done all the tests on the Mud Flap, Sasquatch and without Sasquatch
The blue car is my black diamond, no Sasquatch, the silver-grey Bronco has Sasquatch
Please watch the installation video I made with Gopro

• Fits full size BRONCO with tube steps and rock rails
• I'm going to sell it for $139.99 for 4-pieces, the price for fans is $119.99

I'm now wondering how many people would accept this installation step and price?
How many people will only need the front wheel or the rear wheel?
NOTICE

• 1966 will be removed in the final version
• Don't need to remove the fenders and inner lining to install mud flaps, but to make it easier to shoot, I removed the wheel brows and inner lining, when you install these mud flaps, you have to lift the inner lining to see the part in the video Holes, which are hidden on the other side of the lining

I would only be interested in a pair of front mudflaps.

 

[mjkrawczykjr]

If you say they will fit OBX w steps, I’d be in at the discounted rate for all 4.

Sponsored