There doesn’t appear to be much airflow for the Intercooler from these initial images. Is there something I’m missing or further details that you can elaborate on?
Yeah, whenever I see that airflow to the intercooler seems to be blocked I think, scratch another one off the list for the 2.7L.
Great questions! If you look closely at the Winch area, there are cutouts on either side of the winch and nothing behind the winch that would block air flow. Additionally, there are cut outs on the bends and between welds for additional airflow.Also worried about intercooler air flow, also will that winch mount work with the 2.7?
That is correct. We built this originally on our own Badlands Sasquatch with the HD Modular bumper, but it will work with all variations. Like many rigs, there may be variations in the install, but that is to be expected. - MatsonThey all have the same frame so it should be the same on all as far as this goes.
1. They are specifically designed around Baja Designs S2 Pods - but can be used with any light with that footprint.1) What lights fit the built in cutouts?
2) When are you going to post the instructions?
3)Not sure there is enough material on the rear clevis points for side loading?
FYI sign up for Metalcloaks email, they usually do 10% off on every 3 day weekend holiday.
There are a couple options in the works, but nothing released yet.Ditto! Also, it looks like there will be bolt-on grill guard\hoop options possible? Anymore details/pics on these?
We are fully aware of this issue... the license plate relocation bracket you see on the website pics is literally a variation of our JL version. Not designed for the Bronco. We will be releasing a Bronco Specific license plate relocation soon.On the rear bumper, does the license plate location effect BLIS functionality?
Full and complete view of the camera is available. I will see about getting a shot for you.What about ACC Relocation, also any shots of the Front Camera View
Actually is designed to integrate with our Undercloak system (not in this pic) and covers all the critical elements... no noticeable clearance loss.Hmm...that front bash plate appears so deep, deeper than what Ford provides. Looks like it will take away a bit from the approach angle..not an expert by any means but just my first thoughts.
will this work with the JCR skid system? I have their full skids but really liking this bumper/winch set up. I want something low profile so I do not have to mess with moving the camera in addition to the ACC.
Looking good rear bumper is almost flush with body is there going to be a front bumper version without a winch mount so you won’t have to relocate the ACC.
At this stage probably not. Time to move on to other projects [ie suspension] for the Bronco. I guess we are kinda partial to winches. - MatsonLooking good rear bumper is almost flush with body is there going to be a front bumper version without a winch mount so you won’t have to relocate the ACC.