Rear roll bar storage bags REVIEW, yah yah I bought some

[Snacktime]

So I bought a set of roll bar storage bags. I chose these particular ones because they are plain and black. I paid for these because I am a sucker for tool bags and crap like that.

https://www.amazon.com/gp/aw/d/B0BLK1MHDR?psc=1&ref=ppx_pop_mob_b_asin_image

Overall they take a solid 15 minutes to put together as it takes a few minutes to figure it out. Here are a few assembly pictures in the kitchen.

Next install in the Bronco, yet again another 15 minutes. After trying a few different things I am happy with how they don't fit.

Picture of all the crap I like to carry everywhere. Tire plug kit, first aid kit and some recovery gear.

I will update this as I go wheeling and see if the hold up. Zippers are not the best quality and the biggest red flag at this time.

Sponsored

 

[Tdecell]

I’ve got the same set. They fit, ehh, ok. I haven’t put anything in them yet. We’ll see

 

[da_jokker]

I'll have to check them out in person whenever I can actually make it to a GCB event. I plan on coming to the one this weekend, but the family and I are going to take off for the 3-day so I miss it.

 

[Figmo]

My wife always teases me. “What is it with men? You guys are all suckers over tool bags, flashlights and gloves?” (mind you, this from the woman who probably has 80 purses in her closet)

I’d be all over something like this if they’d make it for a 2 door.

We really need to start a gofundme to raise enough money to send the Chinese a 2 door Bronco. It’s like they bought one 4 door 2 years ago and just pass that around between each other to come out with products for the Bronco.

 

[Snacktime]

@Figmo pretty sure these will fit a 2 door just as nicely as a 4 door! I'm having a hard time keeping them for $90.

 

[Figmo]

@Figmo pretty sure these will fit a 2 door just as nicely as a 4 door! I'm having a hard time keeping them for $90.

Somebody on another thread said the angle and shape of the rear roll bar is different between 2 and 4 door.

Maybe I should pick a set up and just give it a try. Can always send them back if they don’t fit.

EDIT: Just looked closer. I was originally thinking these were the bags designed for the Bronco that fit tight inside the rollbar curve. But upon closer inspection, these look more like a generic type bag. So not the same thing I was thinking about.

 

[Snacktime]

Somebody on another thread said the angle and shape of the rear roll bar is different between 2 and 4 door.

Maybe I should pick a set up and just give it a try. Can always send them back if they don’t fit.

They should work, not sure how far into the passenger area they will go?

I was between bags and MOLLE panels. I could see the dogs getting caught in the panels and went this way. Otherwise bungee cords on MOLLE seem like a better option.

 

[amlikethewind]

So I bought a set of roll bar storage bags. I chose these particular ones because they are plain and black. I paid for these because I am a sucker for tool bags and crap like that.

https://www.amazon.com/gp/aw/d/B0BLK1MHDR?psc=1&ref=ppx_pop_mob_b_asin_image

Overall they take a solid 15 minutes to put together as it takes a few minutes to figure it out. Here are a few assembly pictures in the kitchen.

Next install in the Bronco, yet again another 15 minutes. After trying a few different things I am happy with how they don't fit.

Picture of all the crap I like to carry everywhere. Tire plug kit, first aid kit and some recovery gear.

I will update this as I go wheeling and see if the hold up. Zippers are not the best quality and the biggest red flag at this time.

Thank you for this public service!

Sponsored