Removing back trim on two door

[Billnchristy]

Does anyone have any pictures of what the frame looks like behind the massive trim panel that appears to go the entire length of the truck? Pushing on it it feels like there is a lot of room back there and I might build a sub enclosure on one of the sides if it's possible but it also appears like it is a ton of work, likely requiring the back seats to come out at a minimum.

Curious if there are any pictures of a panel removed out there and if someone could post the shop procedure I would appreciate it greatly.

Sponsored

 

[helifino16]

I saw something on here recently, but cannot recall what they were doing it for. Removing the rear seats was part of it. Also look up @1Five1 Garage on YouTube - they took the entire contents out of a 4-door to install sound deadening material.

This is the Forum entry.

 

[Cygnusx1]

Here you go: https://www.bronco6g.com/forum/thre...move-rear-cargo-trim-panels-for-2-door.32722/

 

[Cygnusx1]

Also, I would be sure to order the 2 piece white/black trim connects before removing, because you will break many/most of these pulling it off.

 

[Karl_in_Chicago]

Also, I would be sure to order the 2 piece white/black trim connects before removing, because you will break many/most of these pulling it off.

Yeah, and apparently currently going for ~$8/ea (IF you can get them)!

 

[Billnchristy]

Balls. Thanks guys. Did anyone who removed them take any pictures?

Sponsored