I managed to get this to show in the APIM module as well but thereās another module that needs this to be activated/changed to workSo, it looks like changing those settings in Forscan added the toggle to Vehicle Setting, but itās locked.
APIM and IPC. There must be more to itā¦figuring we need to dig into someoneās vehicle with Forscan that got the tune installed.I managed to get this to show in the APIM module as well but thereās another module that needs this to be activated/changed to work
I would say rev match every downshift manually till you do it perfectly every time. When you get used to it you won't need to feather the clutch at all.But from 20 yrs of driving manuals I know I would enjoy downshifting without feathering!!
I don't have the answer but the APIM is your sync screen, so that will just add toggles to the menus. Same with the IPC, that's your Instrument Panel behind the steering wheel. If its possible its probably in the PCM/TCM. It could also be buried in the ECU calibration in which case you are SOL.APIM and IPC. There must be more to itā¦figuring we need to dig into someoneās vehicle with Forscan that got the tune installed.
Yeah, Iām thinking there is more to it. I didnāt see anything in any of the other modules, but not comparing AS BUILT to anything. Iām assuming there is something within FDRS that needs dialing in.I don't have the answer but the APIM is your sync screen, so that will just add toggles to the menus. Same with the IPC, that's your Instrument Panel behind the steering wheel. If its possible its probably in the PCM/TCM. It could also be buried in the ECU calibration in which case you are SOL.
Has anyone tried turning rev matching on using the method described in the ProCal 4 installation?
Could mean the +/- for cruise controlSpeed Control Button? Thatās on the Ford device itself, no?
Oh, duh. Good call.Could mean the +/- for cruise control
Have you been able to try it yet?Oh, duh. Good call.
I can give that a try. I still have everything enabled via Forscan. The toggle button is greyed out in settings though.