Section525 - 4D VB Wildtrak

[section525]

Day 1 Reservation Ice Mountain Escapee.

After seeing what my January-build brothers and sisters are going through right now - I feel very lucky for only having to wait four months after my blend date to receive the Bronco.

Reserved 7/14/20
Ordered 3/5/21
Ordered Again 9/17/21
Blend 1/19/22
Built 3/24/22
Delivered 5/6/22

4D VB WT Lux Tow Mic (I didn't hold out for nuthin')

First Major Mods
KMC Technic 17x8.5 +18mm
315/70 BFG MT KM3
Baja Designs Squadron Pro


Future Mods
Winch/Bumper (waiting for something I like)
ARB Compressor
Bimini Top

The Bronco is the closest thing I have to a commuter so it'll stay relatively stockish. I'll build it up a bit mainly for snow-wheeling/cabin accessin'.

Sponsored

 

[section525]

Blue was a must to match the 1975 I've had for a decade and a half!

 

[section525]

Today's mod: Window tint.

Plus a shot of @EIGHTLUG Curtis' balls on my dash.

 

[section525]

I had a Yakima HoldUp2 +2 bike rack which was never going to work on the Bronco. I posted it for sale and a nice fellow offered to trade for his Yakima Hangover 4 with extension. Win!

I'll look for some swing away to replace the extension and see if I can get the gate to open all the way.

 

[Dezertrider20158]

Sweet ride man! I've seen you running around town with the top off the last couple of days.

 

[section525]

Sweet ride man! I've seen you running around town with the top off the last couple of days.

Thanks, Bill! Yeah I had to put the top back on yesterday when I saw those 104 degree days coming. Still needing to order the JTop.

Hopefully you get that EG soon!

 

[AKBronc49]

Beautiful Bronco and the perfect color.

 

[section525]

Bought the KR Off-Road ARB twin compressor and mount kit from @4x4TruckLEDs.com over Memorial Day. Great deal. Received it yesterday and got it all mounted and wired this evening. Easy money. I stripped the entire purple wire out of the harness for a little cleaner install. Other than that... straight forward. Aux 5.

 

[Natai]

Today's mod: Window tint.

Plus a shot of @EIGHTLUG Curtis' balls on my dash.

Which brand arm are you using there?

And more importantly, which length did you use to extend just past the dash like that?

 

[section525]

Which brand arm are you using there?

And more importantly, which length did you use to extend just past the dash like that?

67Designs. The small will get you just to the edge and it’s perfect. I’ve found that the shorter arms mounted closer to the center of the rail work best. Less vibrating.

 

[section525]

Here’s a shot of my InReach mount as well. This is a short arm to the 1” Ram mount.

 

[DangerMTBBronco]

67Designs. The small will get you just to the edge and it’s perfect. I’ve found that the shorter arms mounted closer to the center of the rail work best. Less vibrating.

I've had mine installed for about 3 months and initially loved it, but have since noticed it getting very unstable and wobbling. I have only been mounting a single GoPro in the center and an iPhone on a medium arm occasionally. Curious how is yours holding up?

Sponsored