Slowly Adding Mods to VB BaseSquatch 2 Door

[71to21-2DR]

VB BaseSquatch 2 door V6 Mods:

So Far…
-Husky Liners
-Icon Rebound Titanium
17x 8.5 ‘0’ Offset

-Nitto Ridge Grapplers
305/70-17 (34x12)

-Zone 1 inch Sas Level Frt.
(Need alignment still)

-undercoated from door bottom down the Pinch weld.

-Weathertech Cup phone holder

-Visor Warning Label Blackout stickers

-K&N drop in Filter

Need to install still…

-MSRP High clearance Cat-Back Exhaust

-Kicker Key 200.4 Plug and play amp.

-Start/Stop Eliminator

-GOAT fab Sliders
Just Shipped! Yaay!

—B/Order Oracle Triple White Foglamp kit for Mod Bumper

FUTURE:
-Steel Rear bumper With Lights

-Window Tint

-Neo-Camo seat covers

- Kicker Speakers

-(maybe kicker Hideaway Sub)

UPDATE 12/21/22:

Did a few more mods
Exhaust sounds awesome!
Especially in sport mode where it actually shifts like a normal vehicle!
I LOVE my goat sliders!
Strong as hell!!
Even though they are body mounted. They are 1/4” gusseted
Brackets that hug the contour of the underside, and the Pinch covers, are 1/8 or so plate, and really make that edge solid!

UPDATE:
Added the kicker key amp, snd Kicker speakers!
WOW!!!!
Still think a sub would finish it off… but I don’t want to use an extra square inch of the Precious little cargo space an amp would use.
Maybe later after I yank the rear seats and make a raised platform, to hide it and tools under.
but for now it has enough mid bass to blast most Rock-metal- punk etc.

UPDATE:
Installed the Oracle Triple lights
HOLY cow they are Bright!!
I can’t really drive around town or traffic with them on because they’re just too freaking bright and they’re already adjusted lower than the headlights.
but they do cut through the fog and light up the ditch just have to turn them off like high beams when people are coming.

Sponsored

 

[2020FordRaptor]

VB BaseSquatch 2 door V6 Mods:

So Far…
-Husky Liners
-Icon Rebound Titanium
17x 8.5 ‘0’ Offset

-Nitto Ridge Grapplers
305/70-17 (34x12)

-Zone 1 inch Sas Level Frt.
(Need alignment still)

-undercoated from door bottom down the Pinch weld.

-Weathertech Cup phone holder

-Visor Warning Label Blackout stickers

-K&N drop in Filter

Need to install still…

-MSRP High clearance Cat-Back Exhaust

-Kicker Key 200.4 Plug and play amp.

-Start/Stop Eliminator

—B/Order Oracle Triple White Foglamp kit for Mod Bumper

FUTURE:
-Steel Rear bumper With Lights

-Window Tint

-Neo-Camo seat covers

- Kicker Speakers

-(maybe kicker Hideaway Sub)

Looks great!

 

[SasquatchMansquatch]

Looks good. Post again after you've finished those planned upgrades.

 

[Dusty at ICON]

Looks great!

 

[msatts]

How'd you mount your front license plate?

 

[Tricky Dick]

Beautiful Bronco. I'm surprised to see you went smaller on the tires. I was thinking of trying a 295 or 305 because mine feels too sluggish on 315s.

 

[71to21-2DR]

How'd you mount your front license plate?

I don’t have the radar thing inside the plastic cover so I took some 1 inch pipe insulation foam and wedged it in there, between the plate, and the black plastic cover! it’s not going anywhere

 

[71to21-2DR]

Beautiful Bronco. I'm surprised to see you went smaller on the tires. I was thinking of trying a 295 or 305 because mine feels too sluggish on 315s.

Yeah, I decided in person the Sasquatch 2 door is high enough. It’s almost as high as my 4 inch lifted 71 was!
I know that the Nittos run a little bit bigger than most other tires so I wanted a little bit of a bigger gap in the wheel wells give the impression that it is higher than it is!

 

[Wild Horses 4x4]

VB BaseSquatch 2 door V6 Mods:

So Far…
-Husky Liners
-Icon Rebound Titanium
17x 8.5 ‘0’ Offset

-Nitto Ridge Grapplers
305/70-17 (34x12)

-Zone 1 inch Sas Level Frt.
(Need alignment still)

-undercoated from door bottom down the Pinch weld.

-Weathertech Cup phone holder

-Visor Warning Label Blackout stickers

-K&N drop in Filter

Need to install still…

-MSRP High clearance Cat-Back Exhaust

-Kicker Key 200.4 Plug and play amp.

-Start/Stop Eliminator

-GOAT fab Sliders
Just Shipped! Yaay!

—B/Order Oracle Triple White Foglamp kit for Mod Bumper

FUTURE:
-Steel Rear bumper With Lights

-Window Tint

-Neo-Camo seat covers

- Kicker Speakers

-(maybe kicker Hideaway Sub)

Build is looking great! Keep it up

 

[71to21-2DR]

Build is looking great! Keep it up

2 Questions:
Are the 6G Broncos included in your annual get togethers?
Im pretty sure my old 71’ new owner brings his there Still (should not of sold it)

2. Are you guys gonna sell parts and make a catalog for them also?

thanks Rick

new one!

 

[71to21-2DR]

Pull yourself together man!!!

 

[Wild Horses 4x4]

2 Questions:
Are the 6G Broncos included in your annual get togethers?
Im pretty sure my old 71’ new owner brings his there Still (should not of sold it)

2. Are you guys gonna sell parts and make a catalog for them also?

thanks Rick

new one!

Are the 6G Broncos included in your annual get togethers?
Im pretty sure my old 71’ new owner brings his there Still (should not of sold it)
- Yes, we had A LOT of them at our most recent Roundup.

2. Are you guys gonna sell parts and make a catalog for them also?
- Yes, we are partnering up with the best brands and we're also creating our own line of 6G products to take on the wild! be sure to visit: https://www.wildhorses4x4.com/category/2021_Ford_Bronco

 

[Wild Horses 4x4]

Are the 6G Broncos included in your annual get togethers?
Im pretty sure my old 71’ new owner brings his there Still (should not of sold it)
- Yes, we had A LOT of them at our most recent Roundup.

2. Are you guys gonna sell parts and make a catalog for them also?
- Yes, we are partnering up with the best brands and we're also creating our own line of 6G products to take on the wild! be sure to visit: https://www.wildhorses4x4.com/category/2021_Ford_Bronco

Just a heads up our Roundup Event is now a 2-day thing... 2nd Day we all go to Prairie City SVRA for some wheeling

 

[71to21-2DR]

Are the 6G Broncos included in your annual get togethers?
Im pretty sure my old 71’ new owner brings his there Still (should not of sold it)
- Yes, we had A LOT of them at our most recent Roundup.

2. Are you guys gonna sell parts and make a catalog for them also?
- Yes, we are partnering up with the best brands and we're also creating our own line of 6G products to take on the wild! be sure to visit: https://www.wildhorses4x4.com/category/2021_Ford_Bronco

Cool! I thought so. But wasn’t sure a lot of us have had the old and the new,
And a lot of us still have the old and the new!!!

Sponsored