- Joined
- Mar 14, 2022
- Threads
- 8
- Messages
- 59
- Reaction score
- 92
- Location
- Utah
- Website
- valkyrieoffroad.com
- Vehicle(s)
- Bronco
- Your Bronco Model
- Black Diamond
- Thread starter
- #1
We greatly appreciate everyone's patience and understanding on our roof rack hiccup.
We are now proud to announce we are ready to launch the 4 Door roof rack again! (2 Door to follow shortly)
https://valkyrieoffroad.com/product-category/ford-bronco/
Be sure to use the Bronco6G exclusive coupon code in our signature below!
Any current product owners should be on the look out for parts to arrive with the next week as we have shipped parts and are currently finishing shipping parts to you!
So what has changed?
1) We redesigned the front windshield mount. We opted for 1/8" steel over the 3/16" aluminum as the thickness in the aluminum wouldn't allow for these tight bends. The design features an inner cross bar mounting point which further disperses the load (New top, old bottom). The steel is coated in our top of the line coating (cleaned, blasted, zinc primed, and top coated).
2) We redesigned both side rails that run the length (forward to rear) of the vehicle. We increased the height by just less than 1/2" which was about a 50% increase, this alone is one of the most significant improvements in rigidity and load capacity. You can also see (pointing in the picture below) that we added material in the middle of the slots.
3) Lastly, we increased the footprint of the forward roof mounting brackets, both the inner and outer brackets. This increased stability of the rack (forward to rear), mostly noticed in the 2 door rack, but is a welcomed improvement to the 4 door as well. This also will increase the dispersion of weight.
If you haven't seen it yet, you can also check out WuNgUn's youtube video reviewing the differences here: https://www.youtube.com/channel/UCNf0ZaNX-v9XKU_o_1BdEgw
We are excited to get these out to you and are confident you are going to love them!
We do have a few in stock, but these will go quick, don't worry though as we have more being made if you order while they are back order you should only be 2-3 weeks out if not sooner.
Please, if you have any questions call (801-820-4125) or email us ([email protected])!
Thanks again for you help and support!
We are now proud to announce we are ready to launch the 4 Door roof rack again! (2 Door to follow shortly)
https://valkyrieoffroad.com/product-category/ford-bronco/
Be sure to use the Bronco6G exclusive coupon code in our signature below!
Any current product owners should be on the look out for parts to arrive with the next week as we have shipped parts and are currently finishing shipping parts to you!
So what has changed?
1) We redesigned the front windshield mount. We opted for 1/8" steel over the 3/16" aluminum as the thickness in the aluminum wouldn't allow for these tight bends. The design features an inner cross bar mounting point which further disperses the load (New top, old bottom). The steel is coated in our top of the line coating (cleaned, blasted, zinc primed, and top coated).
2) We redesigned both side rails that run the length (forward to rear) of the vehicle. We increased the height by just less than 1/2" which was about a 50% increase, this alone is one of the most significant improvements in rigidity and load capacity. You can also see (pointing in the picture below) that we added material in the middle of the slots.
3) Lastly, we increased the footprint of the forward roof mounting brackets, both the inner and outer brackets. This increased stability of the rack (forward to rear), mostly noticed in the 2 door rack, but is a welcomed improvement to the 4 door as well. This also will increase the dispersion of weight.
If you haven't seen it yet, you can also check out WuNgUn's youtube video reviewing the differences here: https://www.youtube.com/channel/UCNf0ZaNX-v9XKU_o_1BdEgw
We are excited to get these out to you and are confident you are going to love them!
We do have a few in stock, but these will go quick, don't worry though as we have more being made if you order while they are back order you should only be 2-3 weeks out if not sooner.
Please, if you have any questions call (801-820-4125) or email us ([email protected])!
Thanks again for you help and support!
Sponsored
Last edited: