- First Name
- Bryan
- Joined
- Dec 13, 2021
- Threads
- 13
- Messages
- 1,759
- Reaction score
- 2,100
- Location
- Hartford, AL
- Vehicle(s)
- '15 F150 Lariat, '04 F150 Lariat, '73 F100 Ranger
- Your Bronco Model
- Outer Banks
I was just installing mine this afternoon. I don’t have all the lights and winch yet, and I didn’t buy the add on bars, but may, will see. I recently put 2.7 SAS shocks on my 2.3 and my front had actually lifted and when I mounted this bumper it dropped about 3/4”.
What slim LED’s did you go with?
Also I need to remove the bumper again and trim the frame ends where the come through the factory mounting plate. The as the bumper will not pull up flush. The sensor hole plugs are a question as well. I have round foam sticky’s but the are the exact size of the sensor hole? Don’t really see a “plug”.
What slim LED’s did you go with?
Also I need to remove the bumper again and trim the frame ends where the come through the factory mounting plate. The as the bumper will not pull up flush. The sensor hole plugs are a question as well. I have round foam sticky’s but the are the exact size of the sensor hole? Don’t really see a “plug”.
Sponsored
Last edited: