What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[BroncoNapped]

Cut a cheap custom cargo mat that fits around my MOLLE panels. Less than $30, looks OEM, h/t @604Bronco .

Also removed the MOLLE panels from my tailgate table and replaced with EVA foam. I never attach anything to it, but when I sleep in the back of the Bronco in the winter my feet sometimes touch it and it is cold. Rather than stuffing clothes sacks for insulation there I just removed the root cause of the problem.

Yep, that stuff works great....

I used those mats for a cheap easy way to level out the back

Sponsored

 

[Haelous]

The tiniest mod: black Ford oval

 

[Herbie]

Not newly installed items and I am sure I have shared them both before, but I went to Costco and got to use both of them this morning. Love @GoatFab And Wicked Relics. And no, I didn't hide my license plate because that's silly.

 

[604Bronco]

Yep, that stuff works great....

I used those mats for a cheap easy way to level out the back

How did you level out the back? Did you post a write-up on it? Looks great!

 

[GroovyGeek]

The tiniest mod: black Ford oval

Been thinking of doing this but was not sure it is a stick on. How did you remove the existing one? Just heat and then pry? Where did you get the emblem?

 

[GroovyGeek]

Added a decent quality front facing camera and wired to a 5 inch monitor

https://a.co/d/3LKfJER
https://a.co/d/0cY28c8

Cut the extra AV input and power jack in order to be able to hide the cables nearly in the gap between the windshield and the dash, soldered the monitor power directly to the power breakout wire that is bundled with the camera AV cable.

The camera is similar to the Natika that many here use but is a) wider angle b) better fisheye distortion corrected and c) less grainy in low light. For the moment it is mounted with VHB tape to the gap between my bumper and lightbar, but I may eventually just drill a hole in the bumper and secure it properly there.

Attaching a few images that show how wide the field of view is. Places a heat gun and a plastic box immediately in front of each tire and could see them on the monitor.

 

[Haelous]

Been thinking of doing this but was not sure it is a stick on. How did you remove the existing one? Just heat and then pry? Where did you get the emblem?

There are two clips and a sticker in the middle.

I just used plastic pry tools. Squirted some goo gone down there, scraped underneath, and pryed it off. Just be patient.

Part is from Ford Performance, ordered it w/a bunch of other stuff back when Ford Accessories was doing 25% off. It's M-1447-SC2.

 

[ralexander1211]

Took it (3 feet) offroad for the first time. Envigorating!

 

[Trilifter7]

removed my capable bumper tonight and installed the modular bumper. Also replaced my stock fender flares with SAS flares. I just need to get some replacement Bronco bolts for the bumper now and I can finally add a hoop bar!

 

[BroncoNapped]

How did you level out the back? Did you post a write-up on it? Looks great!

Thanks, no write up...I figured it was too basic, especially with all the other great seat deletes on 6G....

I just simply took a 1 by 2, counter sunk holes to cover the seat belt bolts, added those foam mats then put 1 and half of the four door cargo mats on top. That's it.

 

[BigJ2]

After finishing my most recent overseas assignment and retiring on 15 December I decided to perpetuate the stereotype that retirees go to Florida during the winter. Drove from TN to Key West on 28/29 December after unwrapping the Bronco from long term storage. Over 2000 miles so far over the trip and headed back to TN today after the perfect sunrise.

Bronco’s done great!

I’d love to see more shots of the fender flares!

 

[BroncoDymond88]

Today I installed the JCR Offroad lower molle panels.

These things are really nice but the youtube video glosses over what to do if you don't have the uppers so it was fun figuring that out.

 

[Laurenrfrawley]

New friend added to the Bronco!

 

[AKBronc49]

Rolled 14k yesterday on my '21.

 

[equitasforall]

I’d love to see more shots of the fender flares!

No problem. They’re right out of the Ford Performance accessory catalog. Here’s a few other pics though.

Sponsored