Putco emblem lights?23WT LUX - Installed fog lights and trail site lights last week and then installed illuminated grill letters this week. Love that look!
No, both items Lumen8 and letters were pretty pricey from Black Label Lighting.
Deep Fried Bronco.Well I didn’t do this today… but I finished up the exterior of my Wildtrak a couple of weeks ago. Still have some touch up to do on the outside and the inside, but I love it.
The product is Monstaliner. Is similar to undercoating and a smooth to bedliner. No lore scratches on the trail! The color I chose his desert sand. They have 39 colors available online. It can be rolled or sprayed on with their Shutz gun and an air compressor at a rate of 20-100 psi. Prep work is simple, but a little un nerving. Door jams, and interior metal is prepped with sandpaper with a max grit of 320. Exterior panels are prepped with a brown or red scotch. Bright pad. All services get wiped down with MEK and a clean cloth. Allow approximately 30 minutes for the chemicals to evaporate and then begin the application process.
If anyone has any questions, feel free to DM me. This is the third vehicle I’ve done with this product, but the bronco was the only NEW vehicle I’ve ever sanded down!
Built Wild…. STAY Wild!
I did this too and found it very satisfying to add more black to my Black Diamond...felt like I was just correcting something from the factory....c'mon Ford!Had my SAS beauty rings powder coated yesterday
For that trim piece that doesn't fit properly, are you sure it doesn't just need a good smack? I found some of the trim pieces (also in the cargo area) to be a bit finicky and needing some extra love to re-attach properly.Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels
Two issues with these panels, but other wise pretty nice
Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default
Issue #2 - the trim piece does not sit correctly after installing the bottom bracket
Other than that they turned out pretty nice
You’re going to have to trim them a bit to get them to sit flush.Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels
Two issues with these panels, but other wise pretty nice
Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default
Issue #2 - the trim piece does not sit correctly after installing the bottom bracket
Other than that they turned out pretty nice
oddly enough the driver side, (with a little effort) attaches fine, The passenger side, I cannot get both sides to clip in. The bottom mounts on this kit can be flexed, I might try to bend them ever so slightly to get the panels to sit properly.
Ah yea, that is another option I could do, thanks for sharingYou’re going to have to trim them a bit to get them to sit flush.
Can I ask what you used to mount your ext?Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels
Two issues with these panels, but other wise pretty nice
Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default
Issue #2 - the trim piece does not sit correctly after installing the bottom bracket
Other than that they turned out pretty nice
I used H3R Extreme Duty Flat Surface Brackets with their Bracket Backing Plates
