- First Name
- Mabett
- Joined
- Dec 29, 2021
- Threads
- 289
- Messages
- 2,646
- Reaction score
- 4,641
- Location
- China
- Website
- www.facebook.com
- Vehicle(s)
- Bronco Black Diamond
- Your Bronco Model
- Black Diamond
- Thread starter
- #256
I updated the installation order of the rear mud flaps, please see if your steps are the same as in the videoAnyone else have problems getting the rear flaps to install? I have a 2021 Badlands 4 door non-SAS. Front flaps went on easily enough and look pretty good. Started with the driver side - followed the instructions on the rear - assembled the the brackets and mounted with the tow hook. Where the cross bar attaches to the slanted plate, there was not enough room to line that up with the holes for the tow hook without contacting another metal part of the body at the very end of the cross bar. Tried installing that bar on the "rear" side of the slanted plate, but the holes on the mudflap do not line up with the holes in that cross bar and the other plate mounted to the wheel well. After an hour of messing around with that setup, I pulled those parts back on and threw it back in the box. Undecided if I'll keep the fronts at this point. I can't tell if it's not manufactured precisely enough, or if they just didn't leave enough wiggle room to make it easily work. If you have any other suggestions for the rear, let me know.
https://www.amazon.com/dp/B0B429KFYQ/ref=brnd_rev_mng
Sponsored