10/31/2022 build week group

[MikeWz]

Same here - 255/942 but I saw that some people in the 400's have had their modules activated. Makes no sense... I am almost convinced mine fell off the production line and has to be rebuilt Or due to the fact the UAW gets election day off, they are behind and maybe it will be activated tomorrow.

Aha! Fingers crossed its just because they're hanging at the Polls today!

Sponsored

 

[Neigh]

Still showing as "in progress" on the trackers. Blend date 11/4, 587/942. No modules. Anyone else in a similar boat?

Yup. I'm 876/942 and I don't have module data populated yet and still showing "In Production".

 

[BroncoAbe]

Sorry I meant to say “In Production”, which is still its current status. I don’t have a built or shipped email and the tracker hasn’t updated past that point. Dealer told me this has happened with the last 2-3 rounds of broncos they’ve gotten delivered, where they either never get marked as “built” or “shipped”, or the update happens well after actual delivery to the customer, but again that’s anecdotal and could be a function of how close they are to the manufacturing location. The modules and tear tag were the only indicator for me that it had finished any amount of production at all.

Congrats! She is a beaut!! How long did it take for the modules and tear tag to come through? I've been checking on the 'Ordertrack' page and nothing shows up at all other than 'invoiced' and 'blend date'

Also, Does anyone know what the 'module information found' with the 'download file' means?

 

[Neigh]

I am almost convinced mine fell off the production line and has to be rebuilt

In a day or two your tracker should update to show the following: "Your Bronco is at the bottom of the eCoat tank, we'll fish it out over the Xmas break and resume production afterwards."

 

[fortmcas]

Congrats! She is a beaut!! How long did it take for the modules and tear tag to come through? I've been checking on the 'Ordertrack' page and nothing shows up at all other than 'invoiced' and 'blend date'

Blend of 11/3, modules midday on 11/5, tear tag morning of 11/7! And thank you! I’m really happy with it so far, although for anyone who ordered the manual you might want to try out the Eco GOAT mode, even coming from a manual Mustang, I found the throttle response at the very beginning of the pedal to be a bit touchy for the RPM the clutch seems to be happy engaging first at ¨̮ that mode tones it down a bit without changing much else since there are no shift point/transmission calibration changes!

 

[Doccruz1]

Tear tag is here Hoorah

 

[GreatDaneMom]

Its interesting that ALL of the Granger builds from the 10/24 build week and many from the 10.17 week were moved to 10/31. I'm speculating they did that in order to fill a rail car headed that way since Granger is a low volume dealer in relative terms. Otherwise, builds from prior build weeks from 10/31 would sit for a few weeks until there were enough to get the rail car hooked up.

Do any of the Granger builds with rail car info show that the rail car is on the move?

Many of us Granger folks from those build weeks are now in the 11/14 build week. Just got my window sticker today. Definitely agree that the move is designed to fill the rail cars and convoys!

 

[Ohnoohnoooo]

Its interesting that ALL of the Granger builds from the 10/24 build week and many from the 10.17 week were moved to 10/31. I'm speculating they did that in order to fill a rail car headed that way since Granger is a low volume dealer in relative terms. Otherwise, builds from prior build weeks from 10/31 would sit for a few weeks until there were enough to get the rail car hooked up.

Do any of the Granger builds with rail car info show that the rail car is on the move?

Yes, moving:
Left Williamsfield, Illinois at 9 am
(Last night was in Gibson, Indiana)

back to going the right direction — and I think your theory is right.

 

[Willhunt4food]

Tear tag just showed! I guess that means they are working today?

 

[nwGTS]

Yes, moving:
Left Williamsfield, Illinois at 9 am
(Last night was in Gibson, Indiana)

back to going the right direction — and I think your theory is right.

Hey maybe you're on your way back to pick up the rest of us.

 

[3LMBBQ]

11/3 blend date
11/4 built
Currently awaiting shipment.
Estimated delivery 11/21-11/27 in CO (small town dealer - Burlington, Colorado)

4 dr OBX 2.3 auto soft top nonSAS chile pepper red

This wait is killer. Though that delivery date is around my birthday so that'll be cool.

Anyone else in Colorado on this build week?

 

[nwGTS]

11/3 blend date
11/4 built
Currently awaiting shipment.
Estimated delivery 11/21-11/27 in CO (small town dealer - Burlington, Colorado)

4 dr OBX 2.3 auto soft top nonSAS chile pepper red

This wait is killer. Though that delivery date is around my birthday so that'll be cool.

Anyone else in Colorado on this build week?

Where did you get your estimated delivery? Ford chat? Dealer?

Edit: Just found it in the backdoor reservation link: Estimated Delivery 11/28/2022 - 12/4/2022

 

[BroncoAbe]

11/3 blend date
11/4 built
Currently awaiting shipment.
Estimated delivery 11/21-11/27 in CO (small town dealer - Burlington, Colorado)

4 dr OBX 2.3 auto soft top nonSAS chile pepper red

This wait is killer. Though that delivery date is around my birthday so that'll be cool.

Anyone else in Colorado on this build week?

Yes to CO builds!! I am going through Granger in Iowa for my dealership, but I'm in the Denver metro area...Bad 7MT MIC High...

supposed to be an 11/4 build date (7/14/2020 res) but also hoping it comes in around Thanksgiving for my birthday!

 

[EternallyWaiting]

Soo I have a tear tag now but no modules are populated. Interesting...

 

[3LMBBQ]

Where did you get your estimated delivery? Ford chat? Dealer?

Edit: Just found it in the backdoor reservation link: Estimated Delivery 11/28/2022 - 12/4/2022

Ford chat for us.

Sponsored