Product Announcement: Hammer Built Flush Fit Fog Light Kit

[DoYouBronco]

Using Baja Designs S1s, our goal was to create the ultimate fog light kit for modular bumper. Our flush fit design replaces the bezel on the S1s and our bracket becomes the new bezel to create a true flush fit design. Looks aren’t everything though, we wanted our kit provide the best lumen/dollar value. With four pairs of S1s you get over 18,000 forward facing, useable lumens. Ensuring you can see every obstacle in your path with enough time to stay in control of your Bronco.

If you’ve ever been out on the trail or backroads and noticed that the stock headlights aren’t sufficient, you aren’t alone. Our flush fit fogs are a true fog light kit and are designed to provide incredible peripheral illumination to ensure optimal visibility and safety. On top of that, getting the lights aimed just where you need them is a worry of the past. No more knocking lights out of alignment when off-roading or washing. We optimized the position of these lights to give you the most visibility in lighting zones 1/2 which will compliment forward facing A pillars, or bumper/grill mounted lights.

If you want a clean fog light kit that looks factory and is actually designed to perform at the highest level, send us a message to learn more about our forum pricing and which beam pattern and color will be best for your application!

Sponsored

 

[Bigmoose]

Cool setup and a great light selection. Since you are replacing the bezel did you retest for IP69K?

 

[Bsenecal]

Using Baja Designs S1s, our goal was to create the ultimate fog light kit for modular bumper. Our flush fit design replaces the bezel on the S1s and our bracket becomes the new bezel to create a true flush fit design. Looks aren’t everything though, we wanted our kit provide the best lumen/dollar value. With four pairs of S1s you get over 18,000 forward facing, useable lumens. Ensuring you can see every obstacle in your path with enough time to stay in control of your Bronco.

If you’ve ever been out on the trail or backroads and noticed that the stock headlights aren’t sufficient, you aren’t alone. Our flush fit fogs are a true fog light kit and are designed to provide incredible peripheral illumination to ensure optimal visibility and safety. On top of that, getting the lights aimed just where you need them is a worry of the past. No more knocking lights out of alignment when off-roading or washing. We optimized the position of these lights to give you the most visibility in lighting zones 1/2 which will compliment forward facing A pillars, or bumper/grill mounted lights.

If you want a clean fog light kit that looks factory and is actually designed to perform at the highest level, send us a message to learn more about our forum pricing and which beam pattern and color will be best for your application!

Am I missing a link to check prices?
Brian

 

[Bsenecal]

Am I missing a link to check prices?
Brian

Never mind I found another thread with that info, not interested in spending $1000 for dog lights.
Brian

 

[DoYouBronco]

Cool setup and a great light selection. Since you are replacing the bezel did you retest for IP69K?

The lights retain their water resistance even with changing the bezel because the gasket is under the lens, not the bezel. Because the bracket is an exact fit with the same torque specs, it achieves the same effect as the bezel. There was no need to retest, as it is effectively the same as replacing the bezel with another Baja designs bezel

 

[HotdogThud]

Never mind I found another thread with that info, not interested in spending $1000 for dog lights.
Brian

usually it's for fog, but I guess it would light up dogs, too.

 

[DoYouBronco]

Never mind I found another thread with that info, not interested in spending $1000 for dog lights.
Brian

I understand, Baja designs makes arguably the best off-road lights out there. With quality comes cost and we priced this kit very competitively.

 

[Bigmoose]

G

The lights retain their water resistance even with changing the bezel because the gasket is under the lens, not the bezel. Because the bracket is an exact fit with the same torque specs, it achieves the same effect as the bezel. There was no need to retest, as it is effectively the same as replacing the bezel with another Baja designs bezel

Great info. Thanks!

 

[Bsenecal]

usually it's for fog, but I guess it would light up dogs, too.

Yes is they do help to see either a dog or through fog.
Fat finger catches me again
Brian

 

[Finbox]

They look good, but I just can’t get over the expose 32 screwheads

 

[HPR23Wildling]

Is there an amber backlight option for the white or amber fogs?

 

[HPR23Wildling]

Also, saw some pics on the site where the screw heads were black?

 

[DoYouBronco]

Also, saw some pics on the site where the screw heads were black?

There is no backlit option on the S1s. The screw heads come in a stainless finish. The reason for that is the black oxide hardware is prone to getting messed up during install, then rusting. Same reason we switched to stainless hardware on our tailgate reinforcement.

 

[Chrome_Pony]

Finally! Been waiting on companies to realize the bezel replacement can make for some crazy designs: like doubling [or quadrupling in this case] the lights, rotating an S2 vertically next to a Squadron putting two S1s next to a Squadron.. the possibilities are significant.

 

[Ozark Ike]

Nice lights. $1000, no thanks.

Sponsored