🎥 The 4WP Bronco Build Walk-Around

[Mike5681]

I notice he said 3-3.5 inches of lift. I believe this is over a stock Bronc, no Squatch. To get 37's . This would make sense to me as to 32/33 are "stock", no Squatch. But if you look at the dash it has what appears to be all hero switches except one, the sta-bar. which makes sense because it is a BD

I guess my point is I believe the 3/3.5 over "stock" and don't want some to think it is 3/3.5 over Squatch, even though this is a Squatched Bronc it may have only gained 1.5/2 inches over Squatched Bronc.

I could be wrong just how I see it.

There are actually 2 switches missing which means this is not a Sas. This image from another post gives a slightly better view than the video.

Sponsored

 

[Nickp]

Finished watching the video, my build as far as what’s underneath will probably end up pretty similar. Very cool rig.

 

[618TRVLWILD]

Ashley are you in Moab??

Nooo....I should of been tho. I was off!!

 

[Broncosx2]

I want those retro stripes!!!!!

 

[BAUS67]

There are actually 2 switches missing which means this is not a Sas. This image from another post gives a slightly better view than the video.

Good eye !! When I re watched the video to check myself I did not watch far enough, maybe. I do remember seeing the shot you posted somewhere.

You are correct. It was hard to tell from the other angle, hence why I was speculating.

 

[Mike5681]

Good eye !! When I re watched the video to check myself I did not watch far enough, maybe. I do remember seeing the shot you posted somewhere.

You are correct. It was hard to tell from the other angle, hence why I was speculating.

This makes my choice for base squatch or BD with mid all that much harder.

 

[chtucker]

Nooo....I should of been tho. I was off!!

I will drink a beer for you!

16 hour drive from Seattle was worth it!

 

[North7]

So I remember them being a magazine? Maybe I'm confusing it with Petersen's 4WD & Off-road.

Yes, it's 4WP, not Perterson's W4D

https://www.4wheelparts.com/a/ford-bronco-aftermarket-hq

Stores everywhere, maybe one near you.
https://www.4wheelparts.com/stores/find-a-store

 

[Hoofnmouth]

I found those flare delete brackets dreamy

 

[abe]

Was this the one with manual hubs? I noticed they didn't touch on that. Maybe it was another one

 

[BAUS67]

This makes my choice for base squatch or BD with mid all that much harder.

Many may chime in on this but, I can tell you from my perspective.


If you wheel it, The stronger, nodular iron center section, 210 front axle in the Squatch is worth it. ESPECIALLY if you want 37's !!

If it's for the mall >>>>>you will be fine. But when it breaks don't call it a POS Ford.

 

[618TRVLWILD]

Was this the one with manual hubs? I noticed they didn't touch on that. Maybe it was another one

I asked the source saying still top secret! So hopefully hear about them later.

 

[abe]

I asked the source saying still top secret! So hopefully hear about them later.

Awesome, thanks!

 

[Erock]

Overall the best looking one yet... I can already envision that flat black stripe on the shadow black body... and this lift is why I didn’t get Sasquatch.

 

[mr. snuffleupagus]

That roof rack looks beefy! Cant wait to see the dynamic load rating.

Sponsored