2 Door Badlands Mods & Upgrades - From Order To Build Out

[userdude]

Thanks, and yes. That is us, I see you going as well. We plan to be there Friday and Saturday. First time out with our New Bronco and first time to Barnwell so coming to learn and explore.

Awesome. I'll be out Saturday, hopefully around 9 or so. Not really sure what to expect... I've also not been to Barnwell yet.

Sponsored

 

[Bad To The Stone]

Awesome. I'll be out Saturday, hopefully around 9 or so. Not really sure what to expect... I've also not been to Barnwell yet.

Sounds good. I think there is a drivers meeting at 9 on Saturday for I assume a convoy over the new Bronco trail they are opening. Should be a fun learning weekend. See you Saturday!

 

[Bad To The Stone]

Oracle Tinted Flush Mount Tail Lights with upgraded Amber/White module. Super clean look for the back of our Ford Bronco Badlands with these. The new Amber / White module really takes these to a new level if you have the signature LED lighting and want to keep the amber turn signal. These also require only 1 Forscan change instead of multiple.

Details about the 1 Forscan change you need to make are in the video. The only change you need to make is to go to the BdyCM (Body Control Module) and find "Rear LED Turn Outage" and change it from Enabled (1) to Disabled (0).

I am not a Forscan expert, only the second time using this tool and this was a very easy modification to set up these new Oracle tail lights. They look awesome and I would highly recommend these.

 

[OracleLights]

Oracle Tinted Flush Mount Tail Lights with upgraded Amber/White module. Super clean look for the back of our Ford Bronco Badlands with these. The new Amber / White module really takes these to a new level if you have the signature LED lighting and want to keep the amber turn signal. These also require only 1 Forscan change instead of multiple.

Details about the 1 Forscan change you need to make are in the video. The only change you need to make is to go to the BdyCM (Body Control Module) and find "Rear LED Turn Outage" and change it from Enabled (1) to Disabled (0).

I am not a Forscan expert, only the second time using this tool and this was a very easy modification to set up these new Oracle tail lights. They look awesome and I would highly recommend these.

Such an awesome video thank you so much for your time in doing this and sharing! Do you mind if we share this video on our site and socials?

 

[Bad To The Stone]

Such an awesome video thank you so much for your time in doing this and sharing! Do you mind if we share this video on our site and socials?

I don’t mind at all. Please share. Happy to help others out.

 

[Bad To The Stone]

Don't want to drill into your plastic and mount your front license plate in front of your grill? This 20-30 minute solution uses existing bolts on the HD Modular bumper and gets the plate nicely out of the way IMO. Just picked up some 1.5" x 1/8" Aluminum from the hardware store and a few basic hand tools - Hacksaw, grinder, vise, drill and all done.

 

[joell king]

Great build ! Keep it up

snaptube vidmate​

 

[Bad To The Stone]

Finally got my Harken Hoister mounted on the ceiling and got the top off of Pebbles. I have seen some pictures of the Harken set up for a Bronco but no full videos so hopefully this will help someone out. Bottom line, I think it works great.

Full set up and install video for the Harken Hoister Lift for a 2 Door Bronco.

 

[Bad To The Stone]

Leveled out the back area of our 2 Door Bronco Badlands to be better for our dog and provide more room to carry luggage on trips. We still need to rear seats sometimes so did not want to do a rear seat delete. Instead, we just made a small platform to level the area and then used a heavy rubber mat from Tractor Supply to cover the whole area.

Worked out great, the platform can stay in place when the seats are up and offers some additional storage underneath.

 

[Bad To The Stone]

Successfully installed this Underground Graphics Matte Black Stripe on our 2023 Bronco Badlands as a DIY project. Bit of a learning curve but the video from Underground Graphics made it possible.

Total install took us about 1.5 - 2 hours. I would rate this as challenging but doable.

We had a couple of bubbles during our install but after about a month in the heat etc. they worked themselves out. We have had this installed for over 6 months now and it only looks better than the day we installed it.

I would highly recommend this product! And we love the way it looks on Bronco.

 

[Bad To The Stone]

Took about 90 minutes to install this AWE Cat Back Exhaust on our 2023 Ford Bronco Badlands. We did that at home with no lift and just a creeper. No trouble getting underneath the Badlands to pull out the old exhaust and get all the new parts installed without a lift.

Love the fit finish and sound of this new AWE Exhaust. Lived up to the other videos I had seen and we would recommend it.

 

[Bad To The Stone]

Pebbles Gets Some Lighting! We installed both Diode Dynamics and Oracle Lighting products to take our Bronco’s lighting game to the next level!

We added Diode Dynamics Stage Series Fog Pocket Pro kit and their Stage Series SS3 Backlit Ditch Kit. We also installed Oracle Lightings Illuminated LED Lettering, which is perfect for enhancing the grill on our Bronco.

 

[Ford Motor Company]

Pebbles Gets Some Lighting! We installed both Diode Dynamics and Oracle Lighting products to take our Bronco’s lighting game to the next level!

We added Diode Dynamics Stage Series Fog Pocket Pro kit and their Stage Series SS3 Backlit Ditch Kit. We also installed Oracle Lightings Illuminated LED Lettering, which is perfect for enhancing the grill on our Bronco.

Your Bronco is looking amazing Thanks for sharing!

 

[Bad To The Stone]

Your Bronco is looking amazing Thanks for sharing!

Thanks! We are loving it. Just finished making some aluminum Tub Covers/Bed Rails for when the top is off and a cross bar for extra clamping for the Front Roof Panels when the top is off. Will get those posted soon and some under the hood mods. Stay tuned!

 

[Bad To The Stone]

Saw someone else make a crossbar to fully secure the front roof panels and finally had a chance to get mine completed. Not a requirement, I ran with the front panels without it for months but I like having it. Also, it gave me a way to modify the soft canvas Bimini top. I now run the front panels to keep sun and rain off my head and the modified Bimini over the back area for shade for the dog. Happy with how it turned out.

Sponsored