Aftermarket wheel options.

[Cptjockitch]

So I was just looking for aftermarket wheel options for the bronco and seems like Fifteen52 has a few options and 17x8.5 with the 6x139.7 lug and 0 offset. 106.2 centerbore seems to be the right size to look for. I’ve always like the Japanese wheels and Kansei makes a truck wheel that seems perfect for the bronco.
https://kanseiwheels.com/products/kansei-knp-truck-black?variant=32170148102227 . https://fifteen52.com/collections/ford-bronco-wheels .

Sponsored

 

[VegasKoop]

So I was just looking for aftermarket wheel options for the bronco and seems like Fifteen52 has a few options and 17x8.5 with the 6x139.7 lug and 0 offset. 106.2 centerbore seems to be the right size to look for. I’ve always like the Japanese wheels and Kansei makes a truck wheel that seems perfect for the bronco.
https://kanseiwheels.com/products/kansei-knp-truck-black?variant=32170148102227 . https://fifteen52.com/collections/ford-bronco-wheels .

Hmmm. None of those will work for me but they look good.

 

[Raptor911]

how do you know the bronco has a 106.2 center bore?

I will give a hint that it not. The 4runner and Tacoma specs are below so the specs you are looking is for a Toyota truck.

Bolt Pattern: 6x5.5 / 6x139.7
Center bore: 106.1 mm (hub-centric for Toyota trucks)

So I was just looking for aftermarket wheel options for the bronco and seems like Fifteen52 has a few options and 17x8.5 with the 6x139.7 lug and 0 offset. 106.2 centerbore seems to be the right size to look for. I’ve always like the Japanese wheels and Kansei makes a truck wheel that seems perfect for the bronco.
https://kanseiwheels.com/products/kansei-knp-truck-black?variant=32170148102227 . https://fifteen52.com/collections/ford-bronco-wheels .

 

[KH_59]

Bronco wheel center bore is probably 93.1mm (like the Ranger).

Why go with zero offset?

 

[69351windsor]

Would have to assume that before long there will be a lot of great aftermarket wheels specifically for the Bronco. Might even be some now.

 

[broadicustomworks]

I certainly hope the 106.2 CB works, as I have 5 of the Fifteen52 Traverse sitting in the shop for it, and it's what Discount Tire brought up on their system as fitment.

zero offset gives you a bit of a deeper profile, just enough to look good.
Same wheels that are on the Overland BL, Traverse with the 0 offset. And they looked GOOD on it.

 

[KH_59]

I certainly hope the 106.2 CB works, as I have 5 of the Fifteen52 Traverse sitting in the shop for it, and it's what Discount Tire brought up on their system as fitment.

https://lugnutguys.com/products/hub-centric-rings-106mm-to-93-1mm-set-of-4

 

[broadicustomworks]

https://lugnutguys.com/products/hub-centric-rings-106mm-to-93-1mm-set-of-4

Thanks, buddy. I knew there had to be rings out there, and those are cheap enough.
Alternate was to get a local machine shop to make me some, if they ended up being needed. But at $11, I'm not sweating it if the bores are in fact larger than needed.

 

[Tonka Bronka]

Would have to assume that before long there will be a lot of great aftermarket wheels specifically for the Bronco. Might even be some now.

That would be a very safe assumption. This party is just getting warmed up!

 

[Cptjockitch]

how do you know the bronco has a 106.2 center bore?

I will give a hint that it not. The 4runner and Tacoma specs are below so the specs you are looking is for a Toyota truck.

Bolt Pattern: 6x5.5 / 6x139.7
Center bore: 106.1 mm (hub-centric for Toyota trucks)

I’m looking at the ford bronco page in the fifteen52 website.

how do you know the bronco has a 106.2 center bore?

I will give a hint that it not. The 4runner and Tacoma specs are below so the specs you are looking is for a Toyota truck.

Bolt Pattern: 6x5.5 / 6x139.7
Center bore: 106.1 mm (hub-centric for Toyota trucks)

center bore size really doesn’t matter. If the bronco does have a smaller bore then these wheels should fit. You can always get a bore ring to make up the difference. 6x139.7 does seem to be right everywhere I look. The 0 offset isn’t set in stone. They also have -10 offset for these wheels.

 

[Raptor911]

what you talking about Willis >> center bore size really doesn’t matter.

??

Why is every oem wheel the correct center bore then?

I’m looking at the ford bronco page in the fifteen52 website.

center bore size really doesn’t matter. If the bronco does have a smaller bore then these wheels should fit. You can always get a bore ring to make up the difference. 6x139.7 does seem to be right everywhere I look. The 0 offset isn’t set in stone. They also have -10 offset for these wheels.

 

[pan-y-cerveza]

Alright! Another centre bore and hub-centric rings discussion!

 

[MikeCt]

Received this response from Custom Wheel House, parent company for
Method Race Wheels. Good news boys, the cavalry is on the way.

 

[Cptjockitch]

what you talking about Willis >> center bore size really doesn’t matter.

??

Why is every oem wheel the correct center bore then?

Most aftermarket wheel manufacturers make the center bore larger so that it can fit more vehicles. You can always use a center bore ring to make up the difference. Should a wheel with a larger center bore stop someone from buying it?

 

[Raptor911]

you never answered my question. Why do Oem wheels have the correct center bore size?

btw ... wheels companies that make wheels to fit multiple cars are taking a short cut.

a reputable wheel company will make wheels specific to one car.

I run Titan7s on my 2019 Raptor. Every wheel is machined exactly to the center bore for every application.

https://titan-7.com/

Most aftermarket wheel manufacturers make the center bore larger so that it can fit more vehicles. You can always use a center bore ring to make up the difference. Should a wheel with a larger center bore stop someone from buying it?

Sponsored