- Thread starter
- #1
Good afternoon Bronco enthusiasts,
I've searched and searched and have not been able to find much about this topic. I recently found a Bronco with 315's on them;
Personally I really like my Big Bend wheels and wanted to keep them, however I didn't want to go with a lift or anything smaller than 35's.
I've been doing some research and wanted to run my build by the forum so it could be teased apart.
What I'm planning on doing;
Removing crash bars both front and back.
Running 1.4" spacers (to clear the control arm and add a bit of poke)
https://www.mishimoto.com/borne-off-road-wheel-spacers-6-139-7-93-1.html
Then go ahead and slap on some 315/70/17 KO2's on all 5 wheels.
I ran the numbers and it looks like this would work with the BB wheels given the spacer.
I've attached the photos of willtheyfit.com, assuming the 1.4" spacer is my offest on the "new setup" correct?
I've searched and searched and have not been able to find much about this topic. I recently found a Bronco with 315's on them;
Personally I really like my Big Bend wheels and wanted to keep them, however I didn't want to go with a lift or anything smaller than 35's.
I've been doing some research and wanted to run my build by the forum so it could be teased apart.
What I'm planning on doing;
Removing crash bars both front and back.
Running 1.4" spacers (to clear the control arm and add a bit of poke)
https://www.mishimoto.com/borne-off-road-wheel-spacers-6-139-7-93-1.html
Then go ahead and slap on some 315/70/17 KO2's on all 5 wheels.
I ran the numbers and it looks like this would work with the BB wheels given the spacer.
I've attached the photos of willtheyfit.com, assuming the 1.4" spacer is my offest on the "new setup" correct?
Sponsored