So I've shared a couple posts with all the rationale. And it seems like through various scaling, i keep coming up within an inch or so of all my dimensions, so this seems fairly accurate. It also corroborates the fact that the rear volume (rear depth) of the 4 door is 50% larger than the 2 door based on FoMoCos official volume figures. Ive spot checked rear hip room, shoulder room, etc, and again, everything keep penciling out to these exact dimensions. This also solves the mystery that the Q&A dimensions were rounding to the half foot, and likely rounding up the 2 door depth, and rounding down the 4 door depth.
So here it is -
4 Door -
33" deep
44-45" wide (depending on where you measure the side walls, but tailgate entry seems closer to 44")
23" tall (to edge of body) and 25" (edge of glass)
2 Door -
22" deep
same width and height
Keep in mind the depth is at the load floor, and you have to factor in the slant of the rear seat.
So here it is -
4 Door -
33" deep
44-45" wide (depending on where you measure the side walls, but tailgate entry seems closer to 44")
23" tall (to edge of body) and 25" (edge of glass)
2 Door -
22" deep
same width and height
Keep in mind the depth is at the load floor, and you have to factor in the slant of the rear seat.
Sponsored
Last edited: