Bronco Raptor parts and numbers starting to show in catalog system

[Jakes22]

Best I can come up with, prices are at list. You will still need to paint and the hood latch may or may not be an issue.

Hood N2DZ-16612-A $1,291.60 (Do not know if comes with "scoop" N2DZ-16C630-AA $850.78 or attaching scoop hardware)
R Hinge N2DZ-16796-A $111.44
L Hinge N2DZ-16797-A $111.02
R Strut N2DZ-16C826-A $56.51
L Strut N2DZ-16C826-B $56.56
Hinge to hood nut (4) W709923-S437 $11.00
Hinge to body bolt (2) W503273-S450B $5.50
Hinge to body bolt (4) W717793-S439 $11.00

I'm getting prices anywhere from $1400 to just over $2000 locally! With no availability, backorder.

I've stared looking at salvage yard options now with no luck on a Braptor. So, for now this is a no go.

Sponsored

 

[Little Foot]

I'm getting prices anywhere from $1400 to just over $2000 locally! With no availability, backorder.

I've stared looking at salvage yard options now with no luck on a Braptor. So, for now this is a no go.

How long is the back order? I'd put it on order...Most times anything I've ordered that was backordered showed up way before it was projected.

 

[Jakes22]

How long is the back order? I'd put it on order...Most times anything I've ordered that was backordered showed up way before it was projected.

Here we go!

January 24th order date. Got confirmation for pick up yesterday, sent one of my guys out to pick up this morning.

 

[Little Foot]

Here we go!

January 24th order date. Got confirmation for pick up yesterday, sent one of my guys out to pick up this morning.

I’m super excited for you. I can’t wait to see how it turns out.

 

[Little Foot]

Here we go!

January 24th order date. Got confirmation for pick up yesterday, sent one of my guys out to pick up this morning.

I thoughts there would be more holes in it to allow more airflow thru it.

 

[Jakes22]

I thoughts there would be more holes in it to allow more airflow thru it.

Yea I did too. From the looks of it, the two bigger rectangular shape holes are the heat extract part of the hood. There's 2 smaller squares that go all the way through.

I'll get an additional shot of the bottom side tomorrow.

 

[Little Foot]

Yea I did too. From the looks of it, the two bigger rectangular shape holes are the heat extract part of the hood. There's 2 smaller squares that go all the way through.

I'll get an additional shot of the bottom side tomorrow.

How did it come out?

 

[Jakes22]

How did it come out?

I didn't get a chance to work on it this past weekend, wife had to leave town on short notice Thursday and I had my 6 and 9 year old for the weekend.

I did get some measurements together and it looks like its going to bolt up using the factory hinges. The stud for the hood strut is pre installed into the hood. But I think im going to get an aftermarket hood strut kit that mounts to the factory hinge and the inner fender. Don't want to swap hinges unless absolutely necessary.

And I've reached out to a couple of shops about the trim panel that goes on the hood, I want the raptor badge gone from the panel. One will fill and overlay the entire trim panel in real carbon fiber and matte clear, the other said they could fill and block out the recessed area, paint black and clear in matte.

 

[Little Foot]

I didn't get a chance to work on it this past weekend, wife had to leave town on short notice Thursday and I had my 6 and 9 year old for the weekend.

I did get some measurements together and it looks like its going to bolt up using the factory hinges. The stud for the hood strut is pre installed into the hood. But I think im going to get an aftermarket hood strut kit that mounts to the factory hinge and the inner fender. Don't want to swap hinges unless absolutely necessary.

And I've reached out to a couple of shops about the trim panel that goes on the hood, I want the raptor badge gone from the panel. One will fill and overlay the entire trim panel in real carbon fiber and matte clear, the other said they could fill and block out the recessed area, paint black and clear in matte.

Pretty exciting for sure

 

[swamp2]

Perhaps a new thread on this hood swap? I keep getting fooled into checking in on this thread for relevant new updates,

 

[Little Foot]

Perhaps a new thread on this hood swap? I keep getting fooled into checking in on this thread for relevant new updates,

Sorry, but this is absolutely the appropriate place for this part of the thread. It is an OEM Raptor part being put onto a regular Bronco. It is what this thread was intended for, as I understand it

 

[swamp2]

Sorry, but this is absolutely the appropriate place for this part of the thread. It is an OEM Raptor part being put onto a regular Bronco. It is what this thread was intended for, as I understand it

Hmmm, that's not what the title and content show. The thread is about the lack of Raptor parts in available databases and that changing and progressing.

 

[Jakes22]

Went a head and started a new thread to keep the peace!


https://www.bronco6g.com/forum/threads/raptor-hood-on-bronco.89673/#post-2172503

 

[swamp2]

Went a head and started a new thread to keep the peace!


https://www.bronco6g.com/forum/threads/raptor-hood-on-bronco.89673/#post-2172503

Thanks much. Appreciated.

Sponsored