Bronco Tailgate Inside Handle Needed (Problem Solved 👍)

[Car Guy Bill]

I think that would be a terrible choice. The hump of the gate already intrudes into the cargo space. The additional metal MOLLE basket only compounds that problem.

I would have to agree with you on that. I am going to sleep on it but most likely will go with this one https://rpmbronco.com/products/2021...ZbHKiLgpcGQQSEOVn9SPkAuZU1jWgQOhoCA14QAvD_BwE and then do a parachute cord handle unless another solution crops up.

Sponsored

 

[AndyPortman]

I personally would do riv-nuts and the paracord grab handles. Would be a lot stronger and less likely to pull out over time.

 

[JWBroncoATL]

Nope Real Estate Photos in the North East Georgia Mountains. Roads are narrow and drop-offs are great.

I live in NGA - great shot!

What lake/bridge is this?

 

[CitrusBronco]

This was solved with soap on a rope, you just need a rope and your issue is solved.
Tailgate on a rope.

 

[Car Guy Bill]

Had a change in how I mounted my interior handle on the Tailgate. My Molle Panel arrived for the curved part of the gate and I did not like how open the panel was showing all of my wiring etc. in the tailgate. https://rpmbronco.com/products/2021...psq=molle&_ss=e&_v=1.0&variant=45615729213731

What I ended up doing was drilling through the tailgate and bolting a strap with some 6mm Stainless Steel hardware and a 3D printed part I designed. I am pleased with the way the project turned out. As you can see from the video you can now pull the tailgate towards you and transfer to the outside handle easily.

 

[Car Guy Bill]

I live in NGA - great shot!

What lake/bridge is this?

That photo is of Sky Lake in Sautee Natuche GA

Sponsored