- First Name
- Toby
- Joined
- Jun 9, 2022
- Threads
- 23
- Messages
- 138
- Reaction score
- 589
- Location
- Washington
- Vehicle(s)
- 2022 4-Door
- Your Bronco Model
- Wildtrak
- Thread starter
- #1
Pretty simple stuff here but thought I'd share in case anyone is looking for ideas or maybe if their particular stuff might fit or not. For reference I use an ARB 37qt fridge, the bins are Rubbermaid 8-gallon Action Packers, the toolbox is an old Craftsman that is roughly 17" x 9" x 9", and the table is a 24" x 48" folding unit from Home Depot:
The main base is anchored to the floor via the bolt holes from the original tie-down points, and the toolbox and Action Packer get secured with folding eye loops that are bolted through the shelf and then use a combination of straps and threaded turnbuckles to cinch in place. Used a similar setup in our Wrangler for years, always held firm and was very useful. Paint is still drying on the lumber and the brackets that hold the cargo basket, I'll try to snap a picture of the "finished" product this evening.
The main base is anchored to the floor via the bolt holes from the original tie-down points, and the toolbox and Action Packer get secured with folding eye loops that are bolted through the shelf and then use a combination of straps and threaded turnbuckles to cinch in place. Used a similar setup in our Wrangler for years, always held firm and was very useful. Paint is still drying on the lumber and the brackets that hold the cargo basket, I'll try to snap a picture of the "finished" product this evening.
Sponsored