Door Sill Warning Label Overlays...?

[MFP2241]

I know @StickerFab makes the Warning Label Overlays for the interior, does anyone make a color matched (Antimatter Blue) version for the warning labels on the door sills?

When driving around with the doors off, all those labels stick out like a sore thumb.

I really don't want to remove the labels, just want to hide them.

Sponsored

 

[jasony2069]

Heat gun, they come off really easy. A blow dryer will also work.

 

[MFP2241]

Heat gun, they come off really easy. A blow dryer will also work.

I know I can pull them off... but, I feel funny about removing stickers that have the VIN on them. I'd rather just cover them if I can.

 

[Tricky Dick]

I know I can pull them off... but, I feel funny about removing stickers that have the VIN on them. I'd rather just cover them if I can.

How about relocating them to a less conspicuous spot?

 

[nottinbe]

I reached out to @StickerFab a long while back wanting exactly this. What I’d like to see is a magnet that could be placed over them so it could be slapped on when the doors come off.

 

[StickerFab]

Hmm so we do have close to paint matched options. Only issue is that the paint is much more dynamic than printed vinyl. In some light it could match really well and not so much in other light.

However it wouldn't be nearly as obvious as the stock labels..

 

[MFP2241]

Hmm so we do have close to paint matched options. Only issue is that the paint is much more dynamic than printed vinyl. In some light it could match really well and not so much in other light.

However it wouldn't be nearly as obvious as the stock labels..

That's absolutely spot on. I think as end users we need to level set our expectations based on color vehicle that we chose.

So, if I'm driving an Oxford White Bronco, I would expect the color to be pretty close. But as a current Antimatter Blue owner, I would not expect the Vinyl to be nearly as dynamic is the paint.

Quite honestly, anything even close to the AB paint would be a huge and welcome improvement.

 

[StickerFab]

On the driver side I feel like I have some stickers that others might not have. Can someone confirm?

Also now that we don't have the two door I just want to confirm the labels there.

Thanks

 

[Area51BS]

Just wrap the jambs black. Cover up the ugly spot welds at the same time

 

[MFP2241]

On the driver side I feel like I have some stickers that others might not have. Can someone confirm?

Also now that we don't have the two door I just want to confirm the labels there.

Thanks

My '21 AB 2-door BaseSquatch has everything in your picture, except for the "bar code" label just under the latch.

 

[StickerFab]

My '21 AB 2-door BaseSquatch has everything in your picture, except for the "bar code" label just under the latch.

Thanks. On mine that says fastpass.

Is your alignment about the same? Would be better to make a single strip vs a patchy mess of covers IMO.

 

[Bikeric]

Quite honestly, anything even close to the AB paint would be a huge and welcome improvement.

So, Black then??

 

[MFP2241]

Thanks. On mine that says fastpass.

Is your alignment about the same? Would be better to make a single strip vs a patchy mess of covers IMO.

That's a good call... I think one for the bottom 2 , and one for the top single would work. The spacing on my bottom two seems a little bit different than the pic.

 

[brettly]

My 2dr ‘23 has the same (without barcode) in a similar layout. On the passenger side there is only the top door removal warning.

 

[MFP2241]

My 2dr ‘23 has the same (without barcode) in a similar layout. On the passenger side there is only the top door removal warning.

I completely forgot about the passenger side...

Sponsored