FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!)

[derichio02]

Good find. Do you know what values to change? And, what are these lights officially called in this menu?

Finally got around to doing this to have the Raptor LEDs on without the headlights. There is actually a drop down in the non ASBuilt module. Worked flawlessly, no errors. Here is a screenshot

Sponsored

 

[Hatman]

I get that, but which code numbers does the HVAC start with? I don’t have my bronco to look it up, I just have a list of numbers.
725?
726?

733-01-01 thru 733-02-04

 

[raptorusmaximus]

I just wish we could set the speed to zero and enable all motion sensitive functionality and let ME decide what I want to do.

 

[Herbie]

The problem is it’s locked so the OP is the one who has to maintain any updates.

Ahhhhh, shows you what I know.

 

[Ducati1098]

733-01-01 thru 733-02-04

	733-01-01	0032	4172	4869
	733-01-02	5A19	E571	8086
	733-01-03	6600	725C	48BA
	733-01-04	08C0	725C	481D
	733-01-05	4212	4264	003A
	733-01-06	E70E	2204	217D
	733-01-07	BC41	5800	7007
	733-01-08	0281	A000	80E6
	733-01-09	2000	0000	0064
	733-01-10	0000	0000	004B
	733-01-11	0000	0000	004C
	733-01-12	0000	0000	004D
	733-01-13	0000	0000	4E
	733-02-01	3146	4D44	458A
	733-02-02	3543	5038	508E
	733-02-03	4C41	3836	3872
	733-02-04	3936	AF

 

[SwampCactus]

They are, but that too disables over 5 mph.

Do you know if it's possible to change that to have them always stay on regardless of speed?

Can someone see if there is a setting for that?

 

[Hatman]

	733-01-01	0032	4172	4869
	733-01-02	5A19	E571	8086
	733-01-03	6600	725C	48BA
	733-01-04	08C0	725C	481D
	733-01-05	4212	4264	003A
	733-01-06	E70E	2204	217D
	733-01-07	BC41	5800	7007
	733-01-08	0281	A000	80E6
	733-01-09	2000	0000	0064
	733-01-10	0000	0000	004B
	733-01-11	0000	0000	004C
	733-01-12	0000	0000	004D
	733-01-13	0000	0000	4E
	733-02-01	3146	4D44	458A
	733-02-02	3543	5038	508E
	733-02-03	4C41	3836	3872
	733-02-04	3936	AF

Thanks, Those are significantly different than mine. I may just live with the knowledge that I have a DTC code!

 

[Ducati1098]

Thanks, Those are significantly different than mine. I may just live with the knowledge that I have a DTC code!

I ran into a similar problem when I installed my 23 module into my 22 wildtrak. The only difference is I used FDRS because I work at a dealership.
But when programming, it knew that the part number I was attempting to do a PMI on wasn't the correct number. So after it finished, it never actually configured the module correctly. I had to go back and update the HVAC module to the latest calibration, and then reconfigure it again. Only then did all my DTC's go away and everything worked correctly.
If you want, I can also send you my As-built data from my 22, with the new 2023 module installed to see how different that is. It wont be until I get home from work though.

 

[Hatman]

I ran into a similar problem when I installed my 23 module into my 22 wildtrak. The only difference is I used FDRS because I work at a dealership.
But when programming, it knew that the part number I was attempting to do a PMI on wasn't the correct number. So after it finished, it never actually configured the module correctly. I had to go back and update the HVAC module to the latest calibration, and then reconfigure it again. Only then did all my DTC's go away and everything worked correctly.
If you want, I can also send you my As-built data from my 22, with the new 2023 module installed to see how different that is. It wont be until I get home from work though.

That would be great. The controller I installed is the 2021 part number but maybe the codes from your 22 would be more similar to what I currently show in my module.

 

[Ducati1098]

That would be great. The controller I installed is the 2021 part number but maybe the codes from your 22 would be more similar to what I currently show in my module.

Ah okay. Well I will send them when I get home and hopefully they will help.

 

[switz]

Finally got around to doing this to have the Raptor LEDs on without the headlights. There is actually a drop down in the non ASBuilt module. Worked flawlessly, no errors. Here is a screenshot

Thanks! Works great. Now, if anyone can find out how to turn off the center screen seat belt nag that would be great.

 

[Ducati1098]

Thanks! Works great. Now, if anyone can find out how to turn off the center screen seat belt nag that would be great.

For the rear seats? I'm pretty sure you can turn that off in the normal settings

 

[switz]

For the rear seats? I'm pretty sure you can turn that off in the normal settings

Not for the rear seats. On the Raptor, the entire center screen gets taken over by a seat belt nag; even when the seat belt is connected. You either have to press the OK button or drive a bit to get rid of it. It is stupid that I have to acknowledge that I have correctly used my seat belt.

 

[derichio02]

Not for the rear seats. On the Raptor, the entire center screen gets taken over by a seat belt nag; even when the seat belt is connected. You either have to press the OK button or drive a bit to get rid of it. It is stupid that I have to acknowledge that I have correctly used my seat belt.

Also if you unbuckle your seat belt there is not even a way to dismiss the pop up. Have to put my seatbelt back on or cycle the ignition. Stupid

 

[Mglynn123]

That would be great. The controller I installed is the 2021 part number but maybe the codes from your 22 would be more similar to what I currently show in my module.

im in a pickle I have a 22 big bend with base headlights bought and installed 23 raptor headlights and modules had 90% function no high beam sent it to the dealer got it back and only low beam works need serious help ordirection from anyone that can help

Sponsored