Front License Plate Bracket Now Available from KR Off-Road

[Aman]

Received the shipping notification from UPS today. Thank you!

Sponsored

 

[4x4TruckLEDs.com]

Received the shipping notification from UPS today. Thank you!

Awesome. Please post some photos up once you install it

 

[privateer35]

Yes, if you have the HD Modular Steel Bumper it uses 2 of the factory bolt locations on the front (and the factory bolts).

Wee ship these in a corrugated cardboard box and also put foam padding around the bracket as well. You could throw it off a roof and it would survive.

Thanks for the info! Purchased!

 

[Aman]

Awesome. Please post some photos up once you install it

Hoping to be assigned a VIN and build date today, so still gonna be a while, LOL. Will be ordering a set of the BD fog lights from you guys in the near future as well.

 

[Jbronc74]

Can you bend mine out to be flat with the skid plate? instead of hanging down? I'm worried if I try to bend it after powdercoat it will crack... i think if someone can come up with one with a hinge like the early broncos had on the tailgate. would be pretty sweet.. you could flip it down flush, then when or if popo says anything you could just flip it up for him...

 

[4x4TruckLEDs.com]

Can you bend mine out to be flat with the skid plate? instead of hanging down? I'm worried if I try to bend it after powdercoat it will crack... i think if someone can come up with one with a hinge like the early broncos had on the tailgate. would be pretty sweet.. you could flip it down flush, then when or if popo says anything you could just flip it up for him...

No sorry they are all at powder coating already. the only one I have that is not powder coated is the prototype one that I was using, but it's already bent (bending it more will weaken it).

If you ever need to remove it you can remove it quickly by removing the 2 bolts is all. But I doubt anybody would ever snag the plate. They'll first do damage to their skid plate before the plate gets hit.

 

[4x4TruckLEDs.com]

We really appreciate the business folks!

Batch #1 has already shipped.
Batch #2 just sold out. This batch is currently at powder coating and we'll be shipping this towards the end of next week.
Batch #3 is on order and has an ETA of 11/19 right now.

To give you an idea on inventory. Batch #2 had double the inventory amount from Batch #1 and Batch #3 has double the inventory amount from Batch #2 (so this should hold us over a bit longer, although as soon as Batch #3 lands we'll be ordering Batch #4).

We're trying to keep them in stock but they just keep selling out. VERY popular item and VERY high quality

 

[Aman]

We really appreciate the business folks!

Batch #1 has already shipped.
Batch #2 just sold out. This batch is currently at powder coating and we'll be shipping this towards the end of next week.
Batch #3 is on order and has an ETA of 11/19 right now.

To give you an idea on inventory. Batch #2 had double the inventory amount from Batch #1 and Batch #3 has double the inventory amount from Batch #2 (so this should hold us over a bit longer, although as soon as Batch #3 lands we'll be ordering Batch #4).

We're trying to keep them in stock but they just keep selling out. VERY popular item and VERY high quality

I received mine yesterday. Quality piece, thank you!

 

[4x4TruckLEDs.com]

I received mine yesterday. Quality piece, thank you!

awesome - be sure to share some photos

 

[t_liz92]

Ordered mine . No truck yet but getting a head start

 

[Lewie]

So if you're in a state (like us) that requires a front license plate, the factory location is nothing short of UGLY.

We've been working on an option for the past month and we're happy to announce that we're accepting orders on the KR Off-Road License Plate Bracket.

It mounts to 2 of the 3 lower accessory bolts on the bottom of your bumper (HD Steel Bumper). It's less of an eye sore here and doesn't block any sensors, light openings, etc... completely out of the way.

If you decide to take your truck off-road we've designed it for quick and easy removal. Just remove the 2 bolts from the tabs on the bracket and you can remove the entire assembly and you won't risk snagging the plate on anything on the trail. When you are done, re-attach the plat to stay legal in your state.

Made right here in the USA from .08" aluminum and powder coated black we also include a lifetime warranty.

The kit includes the license plate bracket along with stainless steel hardware to mount your plate to it. We're even throwing in some black caps as well to hide the bolts (although I like the look without the black caps)

https://www.4x4truckleds.com/kr-off-road-license-plate-bracket-for-2021-ford-bronco/

Price is $60 but use coupon code BRONCO6G and save 10%.

We know there are a few options on the market now, which is never a bad thing. This ones designed for the enthusiast who needs to run a front plate but also loves to do some off-roading (thus the easy removal). You can even build your own if you are crafty and don't mind cutting and bending some metal!

Order placed, THANKS!

 

[PAULWESTSKI]

Just ordered mine!

 

[Double IPA]

Brought my Bronco home today and just placed my order for this!

Not exactly what I was expecting to buy as my first accessory, but in NY its a must and this piece looks real nice. Thanks in advance!

Consider this the before pic

 

[MTNLUV]

Will this work with the capable bumper that is now on the badlands?

 

[4x4TruckLEDs.com]

Will this work with the capable bumper that is now on the badlands?

The 2021 badlands does not have a capable bumper (we actually had a discussion about this in one of the FB forums). 2021 Broncos had 2 bumper offerings. The standard/plastic one and the HD Steel Modular Bumper. The 2022 Broncos will bring to market the capable bumper, but this will not fit the 2022 Broncos Capable Bumper. It only fits the 2021/2022 Broncos with HD Modular Steel Bumpers

Sponsored