Hammer Built Tire Support and Rotopax Bracket Accessory Review plus Pics

[‘21OBX]

So I pulled the accesory bracket today just to confirm the bolts are not making any contact near the hinge area. As stated earlier I have put about 8k miles on the Bronco since installing the bracket which includes some Baja and Trail driving. I've given the suspension a workout.

As expected there are absolutely no signs of any bolt to paint contact. This thing was just designed very well taking advantage of the available space. Picture I took today is at the very bottom of this post, excuse the dust it's remnants of a 120 mile gravel trail loop we found just north of Houston.

I ordered two setups Sunday! One for me and one for my wife’s bronco. Tyson texted me surprisingly on a Sunday morning to thank me for the order and helped me since I accidentally ordered 3 trying to add the tailight extension and accessory mount. Seems like an all around good guy!

Sponsored

 

[Jmart52]

What exhaust is that?

 

[Jmart52]

Sorry it didn't quote for some reason. The exhaust on the red Bronco.

 

[Limecreek]

Installed. I used 20 ft/pounds to torque. I’ll re-torque when I find the spec.

Perfect fit.

 

[5280Bronco]

Installed. I used 20 ft/pounds to torque. I’ll re-torque when I find the spec.

Perfect fit.

18-20 ft/lbs is the current agreed torque which is what I set mine at. No issues so far. Let us know if you end up hearing another value.

 

[CyberOrangeBronco]

Wanted to add some picks with the tred pros mounted.

 

[FATHORSE]

Wanted to add some picks with the tred pros mounted.

Where did you get your graphics from, looks clean.
Like the contrast of the colors.

 

[CyberOrangeBronco]

http://www.undergroundgrfx.com/

Where did you get your graphics from, looks clean.
Like the contrast of the colors.

 

[KompressorV12]

Does anyone have a suggestion for a shovel mounting bracket for the accessory arm?

 

[Roger123]

Saw this on a Bronco from a local off-road shop here in VA. It looks super stout and will be ordering soon.

Are there any discount codes, Bronco6G, military, etc.?

 

[Bentpushrod]

Any plans for a stand alone antennae bracket that bolts directly to the tire support plate. Looking for a simple bracket, and don’t need the accessory bracket used for rotopax, and boards.

 

[DoYouBronco]

Any plans for a stand alone antennae bracket that bolts directly to the tire support plate. Looking for a simple bracket, and don’t need the accessory bracket used for rotopax, and boards.

we have seen some drill two holes in our antenna bracket so it can attach to the threaded fittings pressed into the reinforcement plate....

 

[Bentpushrod]

we have seen some drill two holes in our antenna bracket so it can attach to the threaded fittings pressed into the reinforcement plate....

I whipped Up a simple bracket, turned out nice.

 

[1979]

I whipped Up a simple bracket, turned out nice.

Looks great. This is my plan for a combo antenna mount/chase light. Just because I’m lazy, what’s the bolt size?

 

[Bentpushrod]

Think they were 5/16. 3/4 long

Sponsored