- Thread starter
- #1
I have a base Bronco with the standard suspension and want to swap it with a set of sasquatch bilstein shocks and springs. I found a new set of take offs from an outerbanks sasqautch model but its just all four shocks and springs no upper control arms or rear trailing arms/links (not sure what they are called). My question is....Are the UCA's and rear trailing arms the same on the base suspension system as the ones that came on the sasquatch models? Can you resuse the base UCA's when swapping out the shocks and springs from a sasquatch suspension? will the geometry and suspension angles be the correct and within spec?
Sponsored