Hey! Hey! Any of ya'll experts knows...

[Sparkherd]

...if I can put 315/R70 17 KM3s on my bone-stock Badlands non-SAS with these here wheels?!?

https://performanceparts.ford.com/part/M-1007K-RGR1785OR

Sponsored

 

[HighVelocity]

you'll wanna taker-outie dem dar crasharoonie barzies first.

 

[Sparkherd]

you'll wanna taker-outie dem dar crasharoonie barzies first.

Yer a-startin to talk like me...

 

[Bronc6g22]

You'll also want different wheels. I'd recommend +30 or less. +55 is same as your stock wheels.

 

[Sitruc_btb]

If the actual width is similar to the Goodyears, or Firestone Destination mt2, yes, they will fit.
I swapped 315.70r17 MT2's on my non Squatch BL with factory wheels. Pulled crash bars. I might have had a slight rub on the right front tire, contacting the sway bar at full steering lock to the right. Ive since modified it and clearance isnt a concern anymore.

 

[WarthogJr]

Slap ‘em on an giver hell!

 

[RallyGorgo]

$900 each for wheels?!?!

 

[kojack19]

I think you are going to want a bit more offset. I am running that size tire but the KO with +30. Crash bars out and was fine with no rubbing on the street or moderate offloading. I did just add a small 1" level in front and now feel better about clearance and no difference in how it drives. The 315 KO measures 34.4 inches.

 

[Montana Bronco]

...if I can put 315/R70 17 KM3s on my bone-stock Badlands non-SAS with these here wheels?!?

https://performanceparts.ford.com/part/M-1007K-RGR1785OR

That will be a great looking combination when complete.. Those wheels look great, and are a great deal from Ford. Combined with KM3 ?!! BOOM !

I have no idea if they will fit but looking forward to seeing pics.

 

[Ducati1098]

$900 each for wheels?!?!

I think that's for 4.

 

[RallyGorgo]

I think that's for 4.

Well, looking at the link, it says “Sold in Units of” followed by “Each”. That tells me it’ll be $4500 plus tires, sensors, mounting, & balancing to outfit a Bronco with these nifty wheels. Ouch!!

 

[Aonarch]

Well, looking at the link, it says “Sold in Units of” followed by “Each”. That tells me it’ll be $4500 plus tires, sensors, mounting, & balancing to outfit a Bronco with these nifty wheels. Ouch!!

It is for all four.

OP will want +30 or lower offset.

0 to +25 would be better.

Take a look at the Method Wheels on Ford Performance's site.

 

[Ducati1098]

Well, looking at the link, it says “Sold in Units of” followed by “Each”. That tells me it’ll be $4500 plus tires, sensors, mounting, & balancing to outfit a Bronco with these nifty wheels. Ouch!!

Yes, 4 wheels=1 unit.
It shows the package weight of 160 pounds. Somehow I doubt one wheel weighs that much.
It also wouldn't include 4 TPMS sensors for 1 wheel.

 

[Sparkherd]

Well, looking at the link, it says “Sold in Units of” followed by “Each”. That tells me it’ll be $4500 plus tires, sensors, mounting, & balancing to outfit a Bronco with these nifty wheels. Ouch!!

Sooooo...like the Squatch package!!!!

 

[DefNotBuddyLee]

you'll wanna taker-outie dem dar crasharoonie barzies first.

Not true. You can air down or those crash bars act like the excess line trimmer on your weed-eater. It will take care of any excess rubber on the tire and trim them down to a useable size.

Sponsored